On Tue, Apr 24, 2018 at 03:41:46PM -0600, Keith Busch wrote:
> Signed-off-by: Keith Busch <[email protected]>
Hey, Keith, thanks for the test! Some comments/questions below.
> ---
> common/rc | 17 +++++++++++++++++
> tests/block/016 | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 69 insertions(+)
> create mode 100755 tests/block/016
>
> diff --git a/common/rc b/common/rc
> index 1bd0374..979c8c2 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -171,6 +171,23 @@ _get_pci_dev_from_blkdev() {
> tail -1
> }
>
> +_get_pci_parent_from_blkdev() {
> + readlink -f "$TEST_DEV_SYSFS/device" | \
> + grep -Eo '[0-9a-f]{4,5}:[0-9a-f]{2}:[0-9a-f]{2}\.[0-9a-f]' | \
> + tail -2 | head -1
> +}
> +
> +_test_hotplug_slot() {
I'd call this _test_dev_in_hotplug_slot().
> + parent="$(_get_pci_parent_from_blkdev)"
I haven't been consistent about asking people to do this, but could you
make these variables local? I.e.,
local parent
parent="$(_get_pci_parent_from_blkdev)"
local slt_cap
slt_cap=...
> +
> + slt_cap=$(setpci -s ${parent} CAP_EXP+14.w)
Missing quotes around "${parent}" here (and elsewhere). `make
shellcheck` will catch this.
> + if [ $((0x${slt_cap} & 0x20)) -eq 0 ]; then
> + SKIP_REASON="$TEST_DEV is not in a hot pluggable slot"
> + return 1
> + fi
> + return 0
> +}
> +
> # Older versions of xfs_io use pwrite64 and such, so the error messages won't
> # match current versions of xfs_io. See c52086226bc6 ("filter: xfs_io output
> # has dropped "64" from error messages") in xfstests.
> diff --git a/tests/block/016 b/tests/block/016
> new file mode 100755
> index 0000000..4c2e294
> --- /dev/null
> +++ b/tests/block/016
> @@ -0,0 +1,52 @@
> +#!/bin/bash
> +#
> +# Do disable PCI device while doing I/O to it
> +#
> +# Copyright (C) 2018 Keith Busch <[email protected]>
> +#
> +# This program is free software: you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation, either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program. If not, see <http://www.gnu.org/licenses/>.
> +
> +DESCRIPTION="break PCI link while doing I/O"
> +TIMED=1
> +
> +requires() {
> + _have_fio
> +}
> +
> +device_requires() {
> + _test_dev_is_pci
> + _test_hotplug_slot
> +}
> +
> +test_device() {
> + echo "Running ${TEST_NAME}"
> +
> + parent="$(_get_pci_parent_from_blkdev)"
> +
> + if _test_dev_is_rotational; then
> + size="32m"
> + else
> + size="1g"
> + fi
> +
> + # start fio job
> + _run_fio_rand_io --filename="$TEST_DEV" --size="$size" \
> + --ignore_error=EIO,ENXIO,ENODEV &
> +
> + setpci -s ${parent} CAP_EXP+10.w=10:10
> + sleep 10
> + setpci -s ${parent} CAP_EXP+10.w=00:10
For the sake of people of me who don't speak PCI, what do each of these
commands do? :) Should we make the fio job --time_based instead of using
--size so that we're sure it runs long enough for the sleep?
> + echo "Test complete"
> +}
> --
> 2.14.3
>
