Recently the blk-mq timeout handling code was reworked. See also Tejun Heo, "[PATCHSET v4] blk-mq: reimplement timeout handling", 08 Jan 2018 (https://www.mail-archive.com/[email protected]/msg16985.html). This patch reworks the blk-mq timeout handling code again. The timeout handling code is simplified by introducing a state machine per request. This change avoids that the blk-mq timeout handling code ignores completions that occur after blk_mq_check_expired() has been called and before blk_mq_rq_timed_out() has been called.
Fix this race as follows: - Reduce the gstate field from 64 to 32 bits such that cmpxchg() can be used to update it. Introduce deadline_seq for updating the deadline on 32-bit systems. - Remove the request member variables that became superfluous due to this change, namely gstate_seq and aborted_gstate_sync. - Remove the request state information that became superfluous due to this patch, namely RQF_MQ_TIMEOUT_EXPIRED. - Remove the code that became superfluous due to this change, namely the RCU lock and unlock statements in blk_mq_complete_request() and also the synchronize_rcu() call in the timeout handler. Notes: - Atomic instructions are only used to update the request state if a concurrent request state change could be in progress. - blk_add_timer() has been split into two functions - one for the legacy block layer and one for blk-mq. Signed-off-by: Bart Van Assche <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Keith Busch <[email protected]> Cc: Jianchao Wang <[email protected]> Cc: Ming Lei <[email protected]> Cc: Sebastian Ott <[email protected]> Cc: Sagi Grimberg <[email protected]> Cc: Israel Rukshin <[email protected]>, Cc: Max Gurtovoy <[email protected]> --- Changes compared to v13: - Fixed the code for handling a completion that occurs while the block driver timeout handler is in progress. Changes compared to v12: - Switched from cmpxchg64() to cmpxchg(). This became possible because the deadline is now updated before the request state. - Introduced a new request state to ensure that completions that occur while the timeout function is in progress are not lost. - Left out the ARM cmpxchg64() patch. Changes compared to v11: - Reworked patch 1/2: instead of introducing CONFIG_ARCH_HAVE_CMPXCHG64, make sure that cmpxchg64() is only defined if it can be used. Changes compared to v10: - In patch 1/2, added "default y if 64BIT" to the "config ARCH_HAVE_CMPXCHG64" entry in arch/Kconfig. Left out the "select ARCH_HAVE_CMPXCHG64" statements that became superfluous due to this change (alpha, arm64, powerpc and s390). - Also in patch 1/2, only select ARCH_HAVE_CMPXCHG64 if X86_CMPXCHG64 has been selected. - In patch 2/2, moved blk_mq_change_rq_state() from blk-mq.h to blk-mq.c. - Added a comment header above __blk_mq_requeue_request() and blk_mq_requeue_request(). - Documented the MQ_RQ_* state transitions in block/blk-mq.h. - Left out the fourth argument of blk_mq_rq_set_deadline(). Changes compared to v9: - Addressed multiple comments related to patch 1/2: added CONFIG_ARCH_HAVE_CMPXCHG64 for riscv, modified features/locking/cmpxchg64/arch-support.txt as requested and made the order of the symbols in the arch/*/Kconfig alphabetical where possible. Changes compared to v8: - Split into two patches. - Moved the spin_lock_init() call from blk_mq_rq_ctx_init() into blk_mq_init_request(). - Fixed the deadline set by blk_add_timer(). - Surrounded the das_lock member with #ifndef CONFIG_ARCH_HAVE_CMPXCHG64 / #endif. Changes compared to v7: - Fixed the generation number mechanism. Note: with this patch applied the behavior of the block layer does not depend on the generation number. - Added more 32-bit architectures to the list of architectures on which cmpxchg64() should not be used. Changes compared to v6: - Used a union instead of bit manipulations to store multiple values into a single 64-bit field. - Reduced the size of the timeout field from 64 to 32 bits. - Made sure that the block layer still builds with this patch applied for the sh and mips architectures. - Fixed two sparse warnings that were introduced by this patch in the WRITE_ONCE() calls. Changes compared to v5: - Restored the synchronize_rcu() call between marking a request for timeout handling and the actual timeout handling to avoid that timeout handling starts while .queue_rq() is still in progress if the timeout is very short. - Only use cmpxchg() if another context could attempt to change the request state concurrently. Use WRITE_ONCE() otherwise. Changes compared to v4: - Addressed multiple review comments from Christoph. The most important are that atomic_long_cmpxchg() has been changed into cmpxchg() and also that there is now a nice and clean split between the legacy and blk-mq versions of blk_add_timer(). - Changed the patch name and modified the patch description because there is disagreement about whether or not the v4.16 blk-mq core can complete a single request twice. Kept the "Cc: stable" tag because of https://bugzilla.kernel.org/show_bug.cgi?id=199077. Changes compared to v3 (see also https://www.mail-archive.com/[email protected]/msg20073.html): - Removed the spinlock again that was introduced to protect the request state. v4 uses atomic_long_cmpxchg() instead. - Split __deadline into two variables - one for the legacy block layer and one for blk-mq. Changes compared to v2 (https://www.mail-archive.com/[email protected]/msg18338.html): - Rebased and retested on top of kernel v4.16. Changes compared to v1 (https://www.mail-archive.com/[email protected]/msg18089.html): - Removed the gstate and aborted_gstate members of struct request and used the __deadline member to encode both the generation and state information. block/blk-core.c | 9 +- block/blk-mq-debugfs.c | 4 +- block/blk-mq.c | 260 +++++++++++++++++++++++++++---------------------- block/blk-mq.h | 55 +++++------ block/blk-timeout.c | 107 ++++++++++++-------- block/blk.h | 1 + include/linux/blkdev.h | 44 +++++---- 7 files changed, 262 insertions(+), 218 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 43370faee935..629faab34cf4 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -198,12 +198,9 @@ void blk_rq_init(struct request_queue *q, struct request *rq) rq->internal_tag = -1; rq->start_time_ns = ktime_get_ns(); rq->part = NULL; - seqcount_init(&rq->gstate_seq); - u64_stats_init(&rq->aborted_gstate_sync); - /* - * See comment of blk_mq_init_request - */ - WRITE_ONCE(rq->gstate, MQ_RQ_GEN_INC); +#ifndef CONFIG_64BIT + seqcount_init(&rq->deadline_seq); +#endif } EXPORT_SYMBOL(blk_rq_init); diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index 3080e18cb859..9c539ab2c0dc 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -344,15 +344,15 @@ static const char *const rqf_name[] = { RQF_NAME(STATS), RQF_NAME(SPECIAL_PAYLOAD), RQF_NAME(ZONE_WRITE_LOCKED), - RQF_NAME(MQ_TIMEOUT_EXPIRED), RQF_NAME(MQ_POLL_SLEPT), }; #undef RQF_NAME static const char *const blk_mq_rq_state_name_array[] = { [MQ_RQ_IDLE] = "idle", - [MQ_RQ_IN_FLIGHT] = "in_flight", + [MQ_RQ_IN_FLIGHT] = "in flight", [MQ_RQ_COMPLETE] = "complete", + [MQ_RQ_TIMED_OUT] = "timed out", }; static const char *blk_mq_rq_state_name(enum mq_rq_state rq_state) diff --git a/block/blk-mq.c b/block/blk-mq.c index df928200b17e..fb1cc2153426 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -319,6 +319,7 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, /* tag was already set */ rq->extra_len = 0; rq->__deadline = 0; + WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IDLE); INIT_LIST_HEAD(&rq->timeout_list); rq->timeout = 0; @@ -465,6 +466,39 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q, } EXPORT_SYMBOL_GPL(blk_mq_alloc_request_hctx); +/** + * blk_mq_change_rq_state - atomically test and set request state + * @rq: Request pointer. + * @old_state: Old request state. + * @new_state: New request state. + * + * Returns %true if and only if the old state was @old and if the state has + * been changed into @new. + */ +static bool blk_mq_change_rq_state(struct request *rq, + enum mq_rq_state old_state, + enum mq_rq_state new_state) +{ + union blk_generation_and_state gstate = READ_ONCE(rq->gstate); + union blk_generation_and_state old_val = gstate; + union blk_generation_and_state new_val = gstate; + + old_val.state = old_state; + new_val.state = new_state; + if (new_state == MQ_RQ_IN_FLIGHT) + new_val.generation++; + /* + * For transitions from state in-flight or timed out to another state + * cmpxchg() must be used. For other state transitions it is safe to + * use WRITE_ONCE(). + */ + if (old_state != MQ_RQ_IN_FLIGHT && old_state != MQ_RQ_TIMED_OUT) { + WRITE_ONCE(rq->gstate.val, new_val.val); + return true; + } + return blk_mq_set_rq_state(rq, old_val, new_val); +} + void blk_mq_free_request(struct request *rq) { struct request_queue *q = rq->q; @@ -494,7 +528,8 @@ void blk_mq_free_request(struct request *rq) if (blk_rq_rl(rq)) blk_put_rl(blk_rq_rl(rq)); - blk_mq_rq_update_state(rq, MQ_RQ_IDLE); + if (!blk_mq_change_rq_state(rq, blk_mq_rq_state(rq), MQ_RQ_IDLE)) + WARN_ON_ONCE(true); if (rq->tag != -1) blk_mq_put_tag(hctx, hctx->tags, ctx, rq->tag); if (sched_tag != -1) @@ -547,8 +582,7 @@ static void __blk_mq_complete_request(struct request *rq) bool shared = false; int cpu; - WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IN_FLIGHT); - blk_mq_rq_update_state(rq, MQ_RQ_COMPLETE); + WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_COMPLETE); if (rq->internal_tag != -1) blk_mq_sched_completed_request(rq); @@ -593,36 +627,6 @@ static void hctx_lock(struct blk_mq_hw_ctx *hctx, int *srcu_idx) *srcu_idx = srcu_read_lock(hctx->srcu); } -static void blk_mq_rq_update_aborted_gstate(struct request *rq, u64 gstate) -{ - unsigned long flags; - - /* - * blk_mq_rq_aborted_gstate() is used from the completion path and - * can thus be called from irq context. u64_stats_fetch in the - * middle of update on the same CPU leads to lockup. Disable irq - * while updating. - */ - local_irq_save(flags); - u64_stats_update_begin(&rq->aborted_gstate_sync); - rq->aborted_gstate = gstate; - u64_stats_update_end(&rq->aborted_gstate_sync); - local_irq_restore(flags); -} - -static u64 blk_mq_rq_aborted_gstate(struct request *rq) -{ - unsigned int start; - u64 aborted_gstate; - - do { - start = u64_stats_fetch_begin(&rq->aborted_gstate_sync); - aborted_gstate = rq->aborted_gstate; - } while (u64_stats_fetch_retry(&rq->aborted_gstate_sync, start)); - - return aborted_gstate; -} - /** * blk_mq_complete_request - end I/O on a request * @rq: the request being processed @@ -634,27 +638,23 @@ static u64 blk_mq_rq_aborted_gstate(struct request *rq) void blk_mq_complete_request(struct request *rq) { struct request_queue *q = rq->q; - struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, rq->mq_ctx->cpu); - int srcu_idx; if (unlikely(blk_should_fake_timeout(q))) return; - /* - * If @rq->aborted_gstate equals the current instance, timeout is - * claiming @rq and we lost. This is synchronized through - * hctx_lock(). See blk_mq_timeout_work() for details. - * - * Completion path never blocks and we can directly use RCU here - * instead of hctx_lock() which can be either RCU or SRCU. - * However, that would complicate paths which want to synchronize - * against us. Let stay in sync with the issue path so that - * hctx_lock() covers both issue and completion paths. - */ - hctx_lock(hctx, &srcu_idx); - if (blk_mq_rq_aborted_gstate(rq) != rq->gstate) - __blk_mq_complete_request(rq); - hctx_unlock(hctx, srcu_idx); + /* The loop is for the unlikely case of a race with the timeout code. */ + while (true) { + if (blk_mq_change_rq_state(rq, MQ_RQ_IN_FLIGHT, + MQ_RQ_COMPLETE)) { + __blk_mq_complete_request(rq); + break; + } + if (blk_mq_change_rq_state(rq, MQ_RQ_TIMED_OUT, MQ_RQ_COMPLETE)) + break; + if (WARN_ON_ONCE(blk_mq_rq_state(rq) == MQ_RQ_IDLE || + blk_mq_rq_state(rq) == MQ_RQ_COMPLETE)) + break; + } } EXPORT_SYMBOL(blk_mq_complete_request); @@ -681,27 +681,8 @@ void blk_mq_start_request(struct request *rq) wbt_issue(q->rq_wb, rq); } - WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IDLE); - - /* - * Mark @rq in-flight which also advances the generation number, - * and register for timeout. Protect with a seqcount to allow the - * timeout path to read both @rq->gstate and @rq->deadline - * coherently. - * - * This is the only place where a request is marked in-flight. If - * the timeout path reads an in-flight @rq->gstate, the - * @rq->deadline it reads together under @rq->gstate_seq is - * guaranteed to be the matching one. - */ - preempt_disable(); - write_seqcount_begin(&rq->gstate_seq); - - blk_mq_rq_update_state(rq, MQ_RQ_IN_FLIGHT); - blk_add_timer(rq); - - write_seqcount_end(&rq->gstate_seq); - preempt_enable(); + blk_mq_add_timer(rq); + blk_mq_change_rq_state(rq, MQ_RQ_IDLE, MQ_RQ_IN_FLIGHT); if (q->dma_drain_size && blk_rq_bytes(rq)) { /* @@ -714,27 +695,46 @@ void blk_mq_start_request(struct request *rq) } EXPORT_SYMBOL(blk_mq_start_request); -/* - * When we reach here because queue is busy, it's safe to change the state - * to IDLE without checking @rq->aborted_gstate because we should still be - * holding the RCU read lock and thus protected against timeout. +/** + * __blk_mq_requeue_request - requeue a request + * @rq: request to be requeued + * + * This function is either called by blk_mq_requeue_request() or by the block + * layer core if .queue_rq() returned BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. + * If the request state is MQ_RQ_IN_FLIGHT and if this function is called from + * inside .queue_rq() then it is guaranteed that the timeout code won't try to + * modify the request state while this function is in progress because an RCU + * read lock is held around .queue_rq() and because the timeout code calls + * synchronize_rcu() after having marked requests and before processing + * time-outs. */ static void __blk_mq_requeue_request(struct request *rq) { struct request_queue *q = rq->q; + enum mq_rq_state old_state = blk_mq_rq_state(rq); blk_mq_put_driver_tag(rq); trace_block_rq_requeue(q, rq); wbt_requeue(q->rq_wb, rq); - if (blk_mq_rq_state(rq) != MQ_RQ_IDLE) { - blk_mq_rq_update_state(rq, MQ_RQ_IDLE); + if (old_state != MQ_RQ_IDLE) { + if (!blk_mq_change_rq_state(rq, old_state, MQ_RQ_IDLE)) + WARN_ON_ONCE(true); if (q->dma_drain_size && blk_rq_bytes(rq)) rq->nr_phys_segments--; } } +/** + * blk_mq_requeue_request - requeue a request + * @rq: request to be requeued + * @kick_requeue_list: whether or not to kick the requeue_list + * + * This function is called after a request has completed, after a request has + * timed out or from inside .queue_rq(). In the latter case the request may + * already have been started. + */ void blk_mq_requeue_request(struct request *rq, bool kick_requeue_list) { __blk_mq_requeue_request(rq); @@ -838,25 +838,42 @@ static void blk_mq_rq_timed_out(struct request *req, bool reserved) const struct blk_mq_ops *ops = req->q->mq_ops; enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER; - req->rq_flags |= RQF_MQ_TIMEOUT_EXPIRED; - if (ops->timeout) ret = ops->timeout(req, reserved); switch (ret) { case BLK_EH_HANDLED: + blk_mq_change_rq_state(req, MQ_RQ_TIMED_OUT, MQ_RQ_COMPLETE); __blk_mq_complete_request(req); break; case BLK_EH_RESET_TIMER: + blk_mq_add_timer(req); /* - * As nothing prevents from completion happening while - * ->aborted_gstate is set, this may lead to ignored - * completions and further spurious timeouts. + * The loop is for the unlikely case of a race with the + * completion code. There is no need to reset the deadline + * if the transition to the in-flight state fails because + * the deadline only matters in the in-flight state. */ - blk_mq_rq_update_aborted_gstate(req, 0); - blk_add_timer(req); + while (true) { + if (blk_mq_change_rq_state(req, MQ_RQ_TIMED_OUT, + MQ_RQ_IN_FLIGHT)) + break; + if (blk_mq_rq_state(req) == MQ_RQ_COMPLETE) { + __blk_mq_complete_request(req); + break; + } + if (WARN_ON_ONCE(blk_mq_rq_state(req) == MQ_RQ_IDLE || + blk_mq_rq_state(req) == MQ_RQ_IN_FLIGHT)) + break; + } break; case BLK_EH_NOT_HANDLED: + /* + * If blk_mq_complete_request() has been called while the + * timeout handler was in progress, complete the request. + */ + if (blk_mq_rq_state(req) == MQ_RQ_COMPLETE) + __blk_mq_complete_request(req); break; default: printk(KERN_ERR "block: bad eh return: %d\n", ret); @@ -868,48 +885,60 @@ static void blk_mq_check_expired(struct blk_mq_hw_ctx *hctx, struct request *rq, void *priv, bool reserved) { struct blk_mq_timeout_data *data = priv; - unsigned long gstate, deadline; - int start; + union blk_generation_and_state gstate = READ_ONCE(rq->gstate); + unsigned long deadline; might_sleep(); - if (rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED) - return; - - /* read coherent snapshots of @rq->state_gen and @rq->deadline */ +#ifdef CONFIG_64BIT + deadline = rq->__deadline; +#else while (true) { - start = read_seqcount_begin(&rq->gstate_seq); - gstate = READ_ONCE(rq->gstate); - deadline = blk_rq_deadline(rq); - if (!read_seqcount_retry(&rq->gstate_seq, start)) + int start; + + start = read_seqcount_begin(&rq->deadline_seq); + deadline = rq->__deadline; + if (!read_seqcount_retry(&rq->deadline_seq, start)) break; cond_resched(); } +#endif - /* if in-flight && overdue, mark for abortion */ - if ((gstate & MQ_RQ_STATE_MASK) == MQ_RQ_IN_FLIGHT && + /* + * Make sure that rq->aborted_gstate != rq->gstate if rq->deadline has + * not yet been reached even if a request gets recycled before + * blk_mq_terminate_expired() is called and the value of rq->deadline + * is not modified due to the request recycling. + */ + rq->aborted_gstate = gstate; + rq->aborted_gstate.generation ^= (1UL << 29); + if (gstate.state == MQ_RQ_IN_FLIGHT && time_after_eq(jiffies, deadline)) { - blk_mq_rq_update_aborted_gstate(rq, gstate); + /* request timed out */ + rq->aborted_gstate = gstate; data->nr_expired++; hctx->nr_expired++; } else if (!data->next_set || time_after(data->next, deadline)) { data->next = deadline; data->next_set = 1; } + } static void blk_mq_terminate_expired(struct blk_mq_hw_ctx *hctx, struct request *rq, void *priv, bool reserved) { + union blk_generation_and_state old_val = rq->aborted_gstate; + union blk_generation_and_state new_val = old_val; + + new_val.state = MQ_RQ_TIMED_OUT; + /* - * We marked @rq->aborted_gstate and waited for RCU. If there were - * completions that we lost to, they would have finished and - * updated @rq->gstate by now; otherwise, the completion path is - * now guaranteed to see @rq->aborted_gstate and yield. If - * @rq->aborted_gstate still matches @rq->gstate, @rq is ours. + * We marked @rq->aborted_gstate and waited for ongoing .queue_rq() + * calls. If rq->gstate has not changed that means that it + * is now safe to change the request state and to handle the timeout. */ - if (!(rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED) && - READ_ONCE(rq->gstate) == rq->aborted_gstate) + if (blk_mq_set_rq_state(rq, old_val, new_val)) blk_mq_rq_timed_out(rq, reserved); } @@ -948,10 +977,12 @@ static void blk_mq_timeout_work(struct work_struct *work) bool has_rcu = false; /* - * Wait till everyone sees ->aborted_gstate. The - * sequential waits for SRCUs aren't ideal. If this ever - * becomes a problem, we can add per-hw_ctx rcu_head and - * wait in parallel. + * For very short timeouts it can happen that + * blk_mq_check_expired() modifies the state of a request + * while .queue_rq() is still in progress. Hence wait until + * these .queue_rq() calls have finished. This is also + * necessary to avoid races with blk_mq_requeue_request() for + * requests that have already been started. */ queue_for_each_hw_ctx(q, hctx, i) { if (!hctx->nr_expired) @@ -967,7 +998,7 @@ static void blk_mq_timeout_work(struct work_struct *work) if (has_rcu) synchronize_rcu(); - /* terminate the ones we won */ + /* Terminate the requests marked by blk_mq_check_expired(). */ blk_mq_queue_tag_busy_iter(q, blk_mq_terminate_expired, NULL); } @@ -2049,14 +2080,9 @@ static int blk_mq_init_request(struct blk_mq_tag_set *set, struct request *rq, return ret; } - seqcount_init(&rq->gstate_seq); - u64_stats_init(&rq->aborted_gstate_sync); - /* - * start gstate with gen 1 instead of 0, otherwise it will be equal - * to aborted_gstate, and be identified timed out by - * blk_mq_terminate_expired. - */ - WRITE_ONCE(rq->gstate, MQ_RQ_GEN_INC); +#ifndef CONFIG_64BIT + seqcount_init(&rq->deadline_seq); +#endif return 0; } diff --git a/block/blk-mq.h b/block/blk-mq.h index e1bb420dc5d6..ad7efadd17ab 100644 --- a/block/blk-mq.h +++ b/block/blk-mq.h @@ -2,6 +2,7 @@ #ifndef INT_BLK_MQ_H #define INT_BLK_MQ_H +#include <asm/cmpxchg.h> #include "blk-stat.h" #include "blk-mq-tag.h" @@ -30,18 +31,26 @@ struct blk_mq_ctx { struct kobject kobj; } ____cacheline_aligned_in_smp; -/* - * Bits for request->gstate. The lower two bits carry MQ_RQ_* state value - * and the upper bits the generation number. +/** + * enum mq_rq_state - blk-mq request state + * + * The legal state transitions are: + * - idle -> in-flight: blk_mq_start_request() + * - in-flight -> complete: blk_mq_complete_request() + * - timed out -> complete: blk_mq_complete_request() + * - in-flight -> timed out: request times out + * - complete -> idle: blk_mq_requeue_request() or blk_mq_free_request() + * - in-flight -> idle: blk_mq_requeue_request() or blk_mq_free_request() + * - timed out -> idle: blk_mq_requeue_request() or blk_mq_free_request() + * - timed out -> in-flight: request restart due to BLK_EH_RESET_TIMER + * + * See also blk_generation_and_state.state. */ enum mq_rq_state { MQ_RQ_IDLE = 0, MQ_RQ_IN_FLIGHT = 1, MQ_RQ_COMPLETE = 2, - - MQ_RQ_STATE_BITS = 2, - MQ_RQ_STATE_MASK = (1 << MQ_RQ_STATE_BITS) - 1, - MQ_RQ_GEN_INC = 1 << MQ_RQ_STATE_BITS, + MQ_RQ_TIMED_OUT = 3, }; void blk_mq_freeze_queue(struct request_queue *q); @@ -103,37 +112,21 @@ extern void blk_mq_hctx_kobj_init(struct blk_mq_hw_ctx *hctx); void blk_mq_release(struct request_queue *q); -/** - * blk_mq_rq_state() - read the current MQ_RQ_* state of a request - * @rq: target request. - */ -static inline int blk_mq_rq_state(struct request *rq) +static inline bool blk_mq_set_rq_state(struct request *rq, + union blk_generation_and_state old_val, + union blk_generation_and_state new_val) { - return READ_ONCE(rq->gstate) & MQ_RQ_STATE_MASK; + return cmpxchg(&rq->gstate.val, old_val.val, new_val.val) == + old_val.val; } /** - * blk_mq_rq_update_state() - set the current MQ_RQ_* state of a request + * blk_mq_rq_state() - read the current MQ_RQ_* state of a request * @rq: target request. - * @state: new state to set. - * - * Set @rq's state to @state. The caller is responsible for ensuring that - * there are no other updaters. A request can transition into IN_FLIGHT - * only from IDLE and doing so increments the generation number. */ -static inline void blk_mq_rq_update_state(struct request *rq, - enum mq_rq_state state) +static inline enum mq_rq_state blk_mq_rq_state(struct request *rq) { - u64 old_val = READ_ONCE(rq->gstate); - u64 new_val = (old_val & ~MQ_RQ_STATE_MASK) | state; - - if (state == MQ_RQ_IN_FLIGHT) { - WARN_ON_ONCE((old_val & MQ_RQ_STATE_MASK) != MQ_RQ_IDLE); - new_val += MQ_RQ_GEN_INC; - } - - /* avoid exposing interim values */ - WRITE_ONCE(rq->gstate, new_val); + return READ_ONCE(rq->gstate).state; } static inline struct blk_mq_ctx *__blk_mq_get_ctx(struct request_queue *q, diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 652d4d4d3e97..3abbaa332a91 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -145,6 +145,22 @@ void blk_timeout_work(struct work_struct *work) spin_unlock_irqrestore(q->queue_lock, flags); } +/* Update deadline to @time. May be called from interrupt context. */ +static void blk_mq_rq_set_deadline(struct request *rq, unsigned long new_time) +{ +#ifdef CONFIG_64BIT + rq->__deadline = new_time; +#else + unsigned long flags; + + local_irq_save(flags); + write_seqcount_begin(&rq->deadline_seq); + rq->__deadline = new_time; + write_seqcount_end(&rq->deadline_seq); + local_irq_restore(flags); +#endif +} + /** * blk_abort_request -- Request request recovery for the specified command * @req: pointer to the request of interest @@ -158,11 +174,10 @@ void blk_abort_request(struct request *req) { if (req->q->mq_ops) { /* - * All we need to ensure is that timeout scan takes place - * immediately and that scan sees the new timeout value. - * No need for fancy synchronizations. + * Ensure that a timeout scan takes place immediately and that + * that scan sees the new timeout value. */ - blk_rq_set_deadline(req, jiffies); + blk_mq_rq_set_deadline(req, jiffies); kblockd_schedule_work(&req->q->timeout_work); } else { if (blk_mark_rq_complete(req)) @@ -184,52 +199,17 @@ unsigned long blk_rq_timeout(unsigned long timeout) return timeout; } -/** - * blk_add_timer - Start timeout timer for a single request - * @req: request that is about to start running. - * - * Notes: - * Each request has its own timer, and as it is added to the queue, we - * set up the timer. When the request completes, we cancel the timer. - */ -void blk_add_timer(struct request *req) +static void __blk_add_timer(struct request *req, unsigned long deadline) { struct request_queue *q = req->q; unsigned long expiry; - if (!q->mq_ops) - lockdep_assert_held(q->queue_lock); - - /* blk-mq has its own handler, so we don't need ->rq_timed_out_fn */ - if (!q->mq_ops && !q->rq_timed_out_fn) - return; - - BUG_ON(!list_empty(&req->timeout_list)); - - /* - * Some LLDs, like scsi, peek at the timeout to prevent a - * command from being retried forever. - */ - if (!req->timeout) - req->timeout = q->rq_timeout; - - blk_rq_set_deadline(req, jiffies + req->timeout); - req->rq_flags &= ~RQF_MQ_TIMEOUT_EXPIRED; - - /* - * Only the non-mq case needs to add the request to a protected list. - * For the mq case we simply scan the tag map. - */ - if (!q->mq_ops) - list_add_tail(&req->timeout_list, &req->q->timeout_list); - /* * If the timer isn't already pending or this timeout is earlier * than an existing one, modify the timer. Round up to next nearest * second. */ - expiry = blk_rq_timeout(round_jiffies_up(blk_rq_deadline(req))); - + expiry = blk_rq_timeout(round_jiffies_up(deadline)); if (!timer_pending(&q->timeout) || time_before(expiry, q->timeout.expires)) { unsigned long diff = q->timeout.expires - expiry; @@ -244,5 +224,50 @@ void blk_add_timer(struct request *req) if (!timer_pending(&q->timeout) || (diff >= HZ / 2)) mod_timer(&q->timeout, expiry); } +} +/** + * blk_add_timer - Start timeout timer for a single request + * @req: request that is about to start running. + * + * Notes: + * Each request has its own timer, and as it is added to the queue, we + * set up the timer. When the request completes, we cancel the timer. + */ +void blk_add_timer(struct request *req) +{ + struct request_queue *q = req->q; + unsigned long deadline; + + lockdep_assert_held(q->queue_lock); + + if (!q->rq_timed_out_fn) + return; + if (!req->timeout) + req->timeout = q->rq_timeout; + + deadline = jiffies + req->timeout; + blk_rq_set_deadline(req, deadline); + list_add_tail(&req->timeout_list, &req->q->timeout_list); + + return __blk_add_timer(req, deadline); +} + +/** + * blk_mq_add_timer - set the deadline for a single request + * @req: request for which to set the deadline. + * + * Sets the deadline of a request. The caller must guarantee that the request + * state won't be modified while this function is in progress. + */ +void blk_mq_add_timer(struct request *req) +{ + struct request_queue *q = req->q; + unsigned long deadline; + + if (!req->timeout) + req->timeout = q->rq_timeout; + deadline = jiffies + req->timeout; + blk_mq_rq_set_deadline(req, deadline); + return __blk_add_timer(req, deadline); } diff --git a/block/blk.h b/block/blk.h index eaf1a8e87d11..ffd44cbf3095 100644 --- a/block/blk.h +++ b/block/blk.h @@ -170,6 +170,7 @@ static inline bool bio_integrity_endio(struct bio *bio) void blk_timeout_work(struct work_struct *work); unsigned long blk_rq_timeout(unsigned long timeout); void blk_add_timer(struct request *req); +void blk_mq_add_timer(struct request *req); void blk_delete_timer(struct request *); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index f3999719f828..acc08806a6e5 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -7,6 +7,7 @@ #ifdef CONFIG_BLOCK +#include <linux/atomic.h> /* cmpxchg() */ #include <linux/major.h> #include <linux/genhd.h> #include <linux/list.h> @@ -28,7 +29,6 @@ #include <linux/scatterlist.h> #include <linux/blkzoned.h> #include <linux/seqlock.h> -#include <linux/u64_stats_sync.h> struct module; struct scsi_ioctl_command; @@ -125,15 +125,21 @@ typedef __u32 __bitwise req_flags_t; #define RQF_SPECIAL_PAYLOAD ((__force req_flags_t)(1 << 18)) /* The per-zone write lock is held for this request */ #define RQF_ZONE_WRITE_LOCKED ((__force req_flags_t)(1 << 19)) -/* timeout is expired */ -#define RQF_MQ_TIMEOUT_EXPIRED ((__force req_flags_t)(1 << 20)) /* already slept for hybrid poll */ -#define RQF_MQ_POLL_SLEPT ((__force req_flags_t)(1 << 21)) +#define RQF_MQ_POLL_SLEPT ((__force req_flags_t)(1 << 20)) /* flags that prevent us from merging requests: */ #define RQF_NOMERGE_FLAGS \ (RQF_STARTED | RQF_SOFTBARRIER | RQF_FLUSH_SEQ | RQF_SPECIAL_PAYLOAD) +union blk_generation_and_state { + struct { + uint32_t generation:30; + uint32_t state:2; + }; + uint32_t val; +}; + /* * Try to put the fields that are referenced together in the same cacheline. * @@ -236,28 +242,24 @@ struct request { unsigned int extra_len; /* length of alignment and padding */ - /* - * On blk-mq, the lower bits of ->gstate (generation number and - * state) carry the MQ_RQ_* state value and the upper bits the - * generation number which is monotonically incremented and used to - * distinguish the reuse instances. - * - * ->gstate_seq allows updates to ->gstate and other fields - * (currently ->deadline) during request start to be read - * atomically from the timeout path, so that it can operate on a - * coherent set of information. - */ - seqcount_t gstate_seq; - u64 gstate; - /* * ->aborted_gstate is used by the timeout to claim a specific * recycle instance of this request. See blk_mq_timeout_work(). */ - struct u64_stats_sync aborted_gstate_sync; - u64 aborted_gstate; + union blk_generation_and_state aborted_gstate; - /* access through blk_rq_set_deadline, blk_rq_deadline */ + /* + * Access through blk_rq_deadline() and blk_rq_set_deadline(), + * blk_mark_rq_complete(), blk_clear_rq_complete() and + * blk_rq_is_complete() for legacy queues or blk_mq_rq_state(), + * blk_mq_change_rq_state() and blk_mq_rq_set_deadline() for + * blk-mq queues. deadline_seq protects __deadline in blk-mq mode + * only. + */ + union blk_generation_and_state gstate; +#ifndef CONFIG_64BIT + seqcount_t deadline_seq; +#endif unsigned long __deadline; struct list_head timeout_list; -- 2.16.3
