Hallo, linux-btrfs,
I've (once more) created my test system:
mkfs.btrfs -d raid0 -m raid1 /dev/sdb1 /dev/sdc1
73 GB + 146 GB.
Then I mounted it and copied about 150 GByte onto it. But copying was
incomplete, the job ended with "no space on ..."
# btrfs fi show
Label: 'Scsi' uuid: e30586e9-a903-4d17-8ec0-1781457212c6
Total devices 2 FS bytes used 134.86GB
devid 1 size 68.37GB used 68.37GB path /dev/sdb1
devid 2 size 136.73GB used 68.35GB path /dev/sdc1
Btrfs Btrfs v0.19
# btrfs fi df <mountpoint>
Data, RAID0: total=134.68GB, used=134.67GB
Data: total=8.00MB, used=8.00MB
System, RAID1: total=8.00MB, used=16.00KB
System: total=4.00MB, used=0.00
Metadata, RAID1: total=1.00GB, used=185.39MB
Metadata: total=8.00MB, used=0.00
# df <mountpoint>
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdc1 215059324 141597364 8724 100% /mnt/btr
# fdisk -l
Disk /dev/sdb: 73.4 GB, 73407868928 bytes
Disk /dev/sdc: 146.8 GB, 146814976000 bytes
-----------------------------------
Where is the problem, how can I use the full space?
Viele Gruesse!
Helmut
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
