Thanks Moralejo But im asking about make the heartbeat and the communication to used on both interface (Ethernet bond) so the two interface will be as failover for each other
From: [email protected] [mailto:[email protected]] On Behalf Of Moralejo, Alfredo Sent: Wednesday, May 27, 2009 11:29 PM To: linux clustering Subject: RE: [Linux-cluster] RHCS with two Network card You can take a look to: http://kbase.redhat.com/faq/docs/DOC-5975 I guess it can help you. Related to this. As far as I know conga can not be used from a system out of the cluster to configure clusters when private networks are used for inter-cluster communication, is that right? _____ From: [email protected] [mailto:[email protected]] On Behalf Of anasnajj Sent: Wednesday, May 27, 2009 9:42 PM To: [email protected] Subject: [Linux-cluster] RHCS with two Network card Hi all I have 5 cluster node and each node have two network card eth0 ,eth1 My cluster services have the IP Virtual ranges 10.0.10.100-103 And Eth0 have IP range 10.10.10.10 -13.. I need to setup up the second interface Eth1 to used as heartbeat communication and used as failover for Eth0 if the eth0 have cable failure or down , so how I can implement such scenario??? No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.39/2133 - Release Date: 05/25/09 08:16:00
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
