On Wed, May 27, 2009 at 10:49 PM, anasnajj <[email protected]> wrote:
> Thanks Moralejo > > But im asking about make the heartbeat and the communication to used on > both interface (Ethernet bond) so the two interface will be as failover for > each other > > Have a look at http://www.linuxfoundation.org/en/Net:Bonding Maybe balance-xor. Greetings, Juanra > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Moralejo, Alfredo > *Sent:* Wednesday, May 27, 2009 11:29 PM > *To:* linux clustering > *Subject:* RE: [Linux-cluster] RHCS with two Network card > > > > You can take a look to: > > > > http://kbase.redhat.com/faq/docs/DOC-5975 > > > > I guess it can help you. > > > > Related to this. As far as I know conga can not be used from a system out > of the cluster to configure clusters when private networks are used for > inter-cluster communication, is that right? > > > > > > > > > ------------------------------ > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *anasnajj > *Sent:* Wednesday, May 27, 2009 9:42 PM > *To:* [email protected] > *Subject:* [Linux-cluster] RHCS with two Network card > > > > Hi all > > I have 5 cluster node and each node have two network card eth0 ,eth1 > > My cluster services have the IP Virtual ranges 10.0.10.100-103 > > And Eth0 have IP range 10.10.10.10 -13.. > > I need to setup up the second interface Eth1 to used as heartbeat > communication and used as failover for Eth0 if the eth0 have cable failure > or down , so how I can implement such scenario??? > > > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.339 / Virus Database: 270.12.39/2133 - Release Date: 05/25/09 > 08:16:00 > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster >
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
