I have a problem getting "chat" to recognize my modem. I could sure use some
help/advice.
I am running 2.0.34 from a Slackware distribution, and the modem is on
/dev/cua2 port 0x3E8 irq 11. (setserial -g confirms that).
Below is the chat script I am trying to use, and below that are some lines
from /usr/adm/messages showing what happened.
I ran it with the command
chat -v -f scr1
and at the console it showed me "\d+++\dATH0" (without the quotes) then it
timed out and returned to the prompt.
Here is the script (with secrets suppressed!)
----------------------------------------------------------------------
ABORT BUSY
REPORT CONNECT
"" \d+++\dATH0
OK at&f&c1&d2s7=70
OK atdt(phone number here)
ogin: (account identifier here)
sword: (password here)
"" \d\d\d1
----------------------------------------------------------------------
Here are relevant lines from /usr/adm/messages:
Nov 16 15:21:54 2ndsight chat[155]: abort on (BUSY)
Nov 16 15:21:54 2ndsight chat[155]: report (CONNECT)
Nov 16 15:21:54 2ndsight chat[155]: send (\d+++\dath0^M)
Nov 16 15:21:56 2ndsight chat[155]: expect (OK)
Nov 16 15:22:41 2ndsight chat[155]: alarm
Nov 16 15:22:41 2ndsight chat[155]: Failed
------------------------------------------------------------------------
Any help or suggestions would be greatly appreciated. I am a newcomer to
Linux and would like to get this new installation off the ground... Thankls.
Chuck
Second Sight Software
