Hi Phil
On 2012-6-19 4:12, Simon Baatz wrote:
I see one effect that I don't fully understand.
Similar to the previous implementation, the system is mostly in
kernel space when accessing an encrypted dm-crypt device:
Today I also compiled the patched 3.5.0-rc3 for another NAS box with
MV88F6282-Rev-A0 (LS-WVL), I noticed one thing that when the CESA engine
was used, the interrupt number of mv_crypto kept rising, but the
interrupt number of mv_tdma was always zero.
$ cat /proc/interrupts
CPU0
1: 31296 orion_irq orion_tick
5: 2 orion_irq mv_xor.0
6: 2 orion_irq mv_xor.1
7: 2 orion_irq mv_xor.2
8: 2 orion_irq mv_xor.3
11: 23763 orion_irq eth0
19: 0 orion_irq ehci_hcd:usb1
21: 4696 orion_irq sata_mv
22: 64907 orion_irq mv_crypto
33: 432 orion_irq serial
46: 51 orion_irq mv643xx_eth
49: 0 orion_irq mv_tdma
53: 0 orion_irq rtc-mv
107: 0 - GPIO fan alarm
109: 0 - function
110: 0 - power-on
111: 0 - power-auto
Err: 0
Is this normal?
Regards
Cloudy
--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
