On Fri, 28 Dec 2018 at 10:58, Sumit Garg <sumit.g...@linaro.org> wrote:
>
> Thanks Ard for your comments.
>
> On Thu, 27 Dec 2018 at 23:58, Ard Biesheuvel <ard.biesheu...@linaro.org>
> wrote:
> >
> > On Thu, 27 Dec 2018 at 12:08, Sumit Garg <sumit.g...@linaro.org> wrote:
> > >
> > > On ARM SoC's with TrustZone enabled, peripherals like entropy sources
> > > might not be accessible to normal world (linux in this case) and rather
> > > accessible to secure world (OP-TEE in this case) only. So this driver
> > > aims to provides a generic interface to OP-TEE based random number
> > > generator service.
> > >
> > > Signed-off-by: Sumit Garg <sumit.g...@linaro.org>
> > > ---
> > > MAINTAINERS | 5 +
> > > drivers/char/hw_random/Kconfig | 15 ++
> > > drivers/char/hw_random/Makefile | 1 +
> > > drivers/char/hw_random/optee-rng.c | 273
> > > +++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 294 insertions(+)
> > > create mode 100644 drivers/char/hw_random/optee-rng.c
> > >
> >
> > Hi Sumit,
> >
> > I am having some trouble with this driver. Even though the firmware
> > manages to invoke the pseudo-TA, the kernel driver responds with
> >
> > [ 73.915971] tee_client_open_session failed, error: ffff0008
> >
>
> Please double check UUID in device tree (probably via dtc dump).
>
I have added this to the DT:
--- a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
+++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
@@ -583,6 +583,7 @@
compatible = "linaro,optee-tz";
method = "smc";
status = "disabled";
+ rng-uuid = "ab7a617c-b8e7-4d8f-8301-d09b61036b64";
};
};
};
> > (note that I need to run teesupplicant or the insmod just hangs)
> >
>
> Actually OP-TEE tries to find TA in following order:
>
> 1. early/pseudo TAs (resident).
> 2. Dynamic TAs (loaded at runtime).
>
> So if it doesn't find early/pseudo TAs then it tries to load dynamic
> TAs via tee-supplicant. It seems that its probably stuck in
> "optee_supp_thrd_req" (drivers/tee/optee/supp.c +85) where it waits
> for supplicant to fulfil the request.
>
> I think this should be resolved via TEE bus driver approach that I
> have proposed in previous patch.
>
It would be useful if we could detect the absence of teesupplicant
rather than wait indefinitely. Currenty, we cannot make the RNG driver
a builtin due to this, so please add 'depends on m' as a dependency if
we don't resolve this in the short term.
> > Also, I have some concerns about the DT dependency (see my comment on
> > the previous patch)
> > I will cc you on some patches I have to expose OP-TEE via ACPI (as
> > well as DT) as a platform device. I'd prefer it if we could do the
> > same for this driver in one way or the other.
> >
>
> Probably via TEE bus driver approach we may get rid of DT or ACPI
> dependency. BTW, I will switch to platform device as it looks more
> appropriate.
>
The bus driver approach only makes sense if we can enumerate the
available TAs, rather than describe them via the DT or ACPI tables.
But a child node with its own compatible string is an improvement in
any case, and you can let the driver core instantiate the platform
device for you.
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 0767f1d..fe0fb74 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -11100,6 +11100,11 @@ M: Jens Wiklander <jens.wiklan...@linaro.org>
> > > S: Maintained
> > > F: drivers/tee/optee/
> > >
> > > +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
> > > +M: Sumit Garg <sumit.g...@linaro.org>
> > > +S: Maintained
> > > +F: drivers/char/hw_random/optee-rng.c
> > > +
> > > OPA-VNIC DRIVER
> > > M: Dennis Dalessandro <dennis.dalessan...@intel.com>
> > > M: Niranjana Vishwanathapura <niranjana.vishwanathap...@intel.com>
> > > diff --git a/drivers/char/hw_random/Kconfig
> > > b/drivers/char/hw_random/Kconfig
> > > index dac895d..25a7d8f 100644
> > > --- a/drivers/char/hw_random/Kconfig
> > > +++ b/drivers/char/hw_random/Kconfig
> > > @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
> > > will be called exynos-trng.
> > >
> > > If unsure, say Y.
> > > +
> > > +config HW_RANDOM_OPTEE
> > > + tristate "OP-TEE based Random Number Generator support"
> > > + depends on OPTEE
> > > + default HW_RANDOM
> > > + help
> > > + This driver provides support for OP-TEE based Random Number
> > > + Generator on ARM SoCs where hardware entropy sources are not
> > > + accessible to normal world (Linux).
> > > +
> > > + To compile this driver as a module, choose M here: the module
> > > + will be called optee-rng.
> > > +
> > > + If unsure, say Y.
> > > +
> > > endif # HW_RANDOM
> > >
> > > config UML_RANDOM
> > > diff --git a/drivers/char/hw_random/Makefile
> > > b/drivers/char/hw_random/Makefile
> > > index e35ec3c..7c9ef4a 100644
> > > --- a/drivers/char/hw_random/Makefile
> > > +++ b/drivers/char/hw_random/Makefile
> > > @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o
> > > cavium-rng-vf.o
> > > obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o
> > > obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
> > > obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
> > > +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
> > > diff --git a/drivers/char/hw_random/optee-rng.c
> > > b/drivers/char/hw_random/optee-rng.c
> > > new file mode 100644
> > > index 0000000..8c63730
> > > --- /dev/null
> > > +++ b/drivers/char/hw_random/optee-rng.c
> > > @@ -0,0 +1,273 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (C) 2018 Linaro Ltd.
> > > + */
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/of.h>
> > > +#include <linux/hw_random.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/tee_drv.h>
> > > +#include <linux/uuid.h>
> > > +
> > > +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001
> > > +
> > > +/*
> > > + * TA_CMD_GET_ENTROPY - Get Entropy from RNG
> > > + *
> > > + * param[0] (inout memref) - Entropy buffer memory reference
> > > + * param[1] unused
> > > + * param[2] unused
> > > + * param[3] unused
> > > + *
> > > + * Result:
> > > + * TEE_SUCCESS - Invoke command success
> > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > > + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of
> > > pool
> > > + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
> > > + */
> > > +#define TA_CMD_GET_ENTROPY 0x0
> > > +
> > > +/*
> > > + * TA_CMD_GET_RNG_INFO - Get RNG information
> > > + *
> > > + * param[0] (out value) - value.a: RNG data-rate in bytes per second
> > > + * value.b: Quality/Entropy per 1024 bit of data
> > > + * param[1] unused
> > > + * param[2] unused
> > > + * param[3] unused
> > > + *
> > > + * Result:
> > > + * TEE_SUCCESS - Invoke command success
> > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > > + */
> > > +#define TA_CMD_GET_RNG_INFO 0x1
> > > +
> > > +#define MAX_ENTROPY_REQ_SZ (4 * 1024)
> > > +
> > > +static struct tee_context *ctx;
> > > +static struct tee_shm *entropy_shm_pool;
> > > +static u32 ta_rng_data_rate;
> > > +static u32 ta_rng_seesion_id;
> >
> > session not seesion
> >
>
> Will fix.
>
> > > +
> > > +static size_t get_optee_rng_data(void *buf, size_t req_size)
> > > +{
> > > + u32 ret = 0;
> > > + u8 *rng_data = NULL;
> > > + size_t rng_size = 0;
> > > + struct tee_ioctl_invoke_arg inv_arg = {0};
> > > + struct tee_param param[4] = {0};
> > > +
> > > + /* Invoke TA_CMD_GET_RNG function of Trusted App */
> > > + inv_arg.func = TA_CMD_GET_ENTROPY;
> > > + inv_arg.session = ta_rng_seesion_id;
> > > + inv_arg.num_params = 4;
> > > +
> > > + /* Fill invoke cmd params */
> > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> > > + param[0].u.memref.shm = entropy_shm_pool;
> > > + param[0].u.memref.size = req_size;
> > > + param[0].u.memref.shm_offs = 0;
> > > +
> > > + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > > + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n",
> > > + inv_arg.ret);
> > > + return 0;
> > > + }
> > > +
> > > + rng_data = tee_shm_get_va(entropy_shm_pool, 0);
> > > + if (IS_ERR(rng_data)) {
> > > + pr_err("tee_shm_get_va failed\n");
> > > + return 0;
> > > + }
> > > +
> > > + rng_size = param[0].u.memref.size;
> > > + memcpy(buf, rng_data, rng_size);
> > > +
> > > + return rng_size;
> > > +}
> > > +
> > > +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool
> > > wait)
> > > +{
> > > + u8 *data = buf;
> > > + size_t read = 0, rng_size = 0;
> > > + int timeout = 1;
> > > +
> > > + if (max > MAX_ENTROPY_REQ_SZ)
> > > + max = MAX_ENTROPY_REQ_SZ;
> > > +
> > > + while (read == 0) {
> > > + rng_size = get_optee_rng_data(data, (max - read));
> > > +
> > > + data += rng_size;
> > > + read += rng_size;
> > > +
> > > + if (wait) {
> > > + if (timeout-- == 0)
> > > + return read;
> > > + msleep((1000 * (max - read)) / ta_rng_data_rate);
> > > + } else {
> > > + return read;
> > > + }
> > > + }
> > > +
> > > + return read;
> > > +}
> > > +
> > > +static int optee_rng_init(struct hwrng *rng)
> > > +{
> > > + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ,
> > > + TEE_SHM_MAPPED |
> > > TEE_SHM_DMA_BUF);
> > > + if (IS_ERR(entropy_shm_pool)) {
> > > + pr_err("tee_shm_alloc failed\n");
> > > + return PTR_ERR(entropy_shm_pool);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void optee_rng_cleanup(struct hwrng *rng)
> > > +{
> > > + tee_shm_free(entropy_shm_pool);
> > > +}
> > > +
> > > +static struct hwrng optee_rng = {
> > > + .name = "optee-rng",
> > > + .init = optee_rng_init,
> > > + .cleanup = optee_rng_cleanup,
> > > + .read = optee_rng_read,
> > > +};
> > > +
> > > +static const struct of_device_id optee_match[] = {
> > > + { .compatible = "linaro,optee-tz" },
> > > + {},
> > > +};
> > > +
> > > +static int get_optee_rng_uuid(uuid_t *ta_rng_uuid)
> > > +{
> > > + struct device_node *fw_np;
> > > + struct device_node *np;
> > > + const char *uuid;
> > > +
> > > + /* Node is supposed to be below /firmware */
> > > + fw_np = of_find_node_by_name(NULL, "firmware");
> > > + if (!fw_np)
> > > + return -ENODEV;
> > > +
> > > + np = of_find_matching_node(fw_np, optee_match);
> > > + if (!np || !of_device_is_available(np))
> > > + return -ENODEV;
> > > +
> > > + if (of_property_read_string(np, "rng-uuid", &uuid)) {
> > > + pr_warn("missing \"uuid\" property\n");
> > > + return -ENXIO;
> > > + }
> > > +
> >
> > So, duplicating all of this is really not a good idea.
> >
>
> Yeah, we may not need this in case we go via TEE bus driver approach.
>
> > > + if (uuid_parse(uuid, ta_rng_uuid)) {
> > > + pr_warn("incorrect rng ta uuid\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int get_optee_rng_info(void)
> > > +{
> > > + u32 ret = 0;
> > > + struct tee_ioctl_invoke_arg inv_arg = {0};
> > > + struct tee_param param[4] = {0};
> > > +
> > > + /* Invoke TA_CMD_GET_RNG function of Trusted App */
> > > + inv_arg.func = TA_CMD_GET_RNG_INFO;
> > > + inv_arg.session = ta_rng_seesion_id;
> > > + inv_arg.num_params = 4;
> > > +
> > > + /* Fill invoke cmd params */
> > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> > > +
> > > + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > > + pr_err("TA_CMD_GET_RNG_INFO invoke function error: %x\n",
> > > + inv_arg.ret);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + ta_rng_data_rate = param[0].u.value.a;
> > > + optee_rng.quality = param[0].u.value.b;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const
> > > void *data)
> > > +{
> > > + if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> > > + return 1;
> > > + else
> > > + return 0;
> > > +}
> > > +
> > > +static int __init mod_init(void)
> > > +{
> > > + int ret = 0, err = -ENODEV;
> > > + struct tee_ioctl_open_session_arg sess_arg = {0};
> > > + uuid_t ta_rng_uuid = {0};
> > > +
> > > + err = get_optee_rng_uuid(&ta_rng_uuid);
> > > + if (err)
> > > + return err;
> > > +
> > > + /* Open context with TEE driver */
> > > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> > > + if (IS_ERR(ctx))
> > > + return -ENODEV;
> > > +
> > > + /* Open session with hwrng Trusted App */
> > > + memcpy(sess_arg.uuid, ta_rng_uuid.b, TEE_IOCTL_UUID_LEN);
> > > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> > > + sess_arg.num_params = 0;
> > > +
> > > + ret = tee_client_open_session(ctx, &sess_arg, NULL);
> > > + if ((ret < 0) || (sess_arg.ret != 0)) {
> > > + pr_err("tee_client_open_session failed, error: %x\n",
> > > + sess_arg.ret);
> > > + err = -EINVAL;
> > > + goto out_ctx;
> > > + }
> > > + ta_rng_seesion_id = sess_arg.session;
> > > +
> > > + err = get_optee_rng_info();
> > > + if (err)
> > > + goto out_sess;
> > > +
> > > + err = hwrng_register(&optee_rng);
> > > + if (err) {
> > > + pr_err("registering failed (%d)\n", err);
> > > + goto out_sess;
> > > + }
> > > +
> > > + return 0;
> > > +
> > > +out_sess:
> > > + tee_client_close_session(ctx, ta_rng_seesion_id);
> > > +out_ctx:
> > > + tee_client_close_context(ctx);
> > > +
> > > + return err;
> > > +}
> > > +
> > > +static void __exit mod_exit(void)
> > > +{
> > > + tee_client_close_session(ctx, ta_rng_seesion_id);
> > > + tee_client_close_context(ctx);
> > > + hwrng_unregister(&optee_rng);
> > > +}
> > > +
> > > +module_init(mod_init);
> > > +module_exit(mod_exit);
> > > +
> > > +MODULE_LICENSE("GPL");
> > > +MODULE_AUTHOR("Sumit Garg <sumit.g...@linaro.org>");
> > > +MODULE_DESCRIPTION("OP-TEE based random number generator driver");
> > > +MODULE_SOFTDEP("pre: optee");
> >
> > This is also an indicator that the API design needs some work. If the
> > OP-TEE driver becomes a 'bus' driver of some sort, the child RNG
> > device (which is what this driver should bind to) will only exist if
> > a) the OP-TEE driver is loaded, and b) it has actually bound to the
> > /firmware/optee node.
> >
>
> Agree.
>
> > > --
> > > 2.7.4
> > >
