On 26-01-20 16:49:26, Abel Vesa wrote:
> On 26-01-12 14:53:18, Luca Weiss wrote:
> > Add the nodes for the UFS PHY and UFS host controller, along with the
> > ICE used for UFS.
> > 
> > Reviewed-by: Konrad Dybcio <[email protected]>
> > Reviewed-by: Dmitry Baryshkov <[email protected]>
> > Signed-off-by: Luca Weiss <[email protected]>
> > ---
> >  arch/arm64/boot/dts/qcom/milos.dtsi | 129 
> > +++++++++++++++++++++++++++++++++++-
> >  1 file changed, 126 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi 
> > b/arch/arm64/boot/dts/qcom/milos.dtsi
> > index e1a51d43943f..7c8a84bfaee1 100644
> > --- a/arch/arm64/boot/dts/qcom/milos.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/milos.dtsi
> > @@ -1151,6 +1151,129 @@ aggre2_noc: interconnect@1700000 {
> >                     qcom,bcm-voters = <&apps_bcm_voter>;
> >             };
> >  
> > +           ufs_mem_phy: phy@1d80000 {
> > +                   compatible = "qcom,milos-qmp-ufs-phy";
> > +                   reg = <0x0 0x01d80000 0x0 0x2000>;
> > +
> > +                   clocks = <&rpmhcc RPMH_CXO_CLK>,
> > +                            <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
> > +                            <&tcsr TCSR_UFS_CLKREF_EN>;
> > +                   clock-names = "ref",
> > +                                 "ref_aux",
> > +                                 "qref";
> > +
> > +                   resets = <&ufs_mem_hc 0>;
> > +                   reset-names = "ufsphy";
> > +
> > +                   power-domains = <&gcc UFS_MEM_PHY_GDSC>;
> > +
> > +                   #clock-cells = <1>;
> > +                   #phy-cells = <0>;
> > +
> > +                   status = "disabled";
> > +           };
> > +
> > +           ufs_mem_hc: ufshc@1d84000 {
> > +                   compatible = "qcom,milos-ufshc", "qcom,ufshc", 
> > "jedec,ufs-2.0";
> > +                   reg = <0x0 0x01d84000 0x0 0x3000>;
> > +
> > +                   interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
> > +
> > +                   clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> > +                            <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> > +                            <&gcc GCC_UFS_PHY_AHB_CLK>,
> > +                            <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> > +                            <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
> 
> Maybe I'm looking at the wrong documentation, but it doesn't seem to exist
> such clock on Milos. It does exist on SM8650 though. So maybe the TCSR CC
> driver is not really that much compatible between these two platforms.
> 
> I take it that the UFS works. Maybe because the actual TCSR UFS clkref
> is left enabled at boot?

Oh, nevemind. I think I was looking at the wrong SoC.

Reply via email to