> We have a Zyxel Omni TA128 ISDN modem in our office. While we have taken
> two B1 channels from VSNL, we have been using one for voice and one for
> data till now.
>
> My question is how does one enable the modem to connect at 128kbps? The
> modem manual says that one has to enable channel bundling mode(AT&J3
> etc.) and then dial ATDI<firstnumber>+<secondnumber> . The modem makes two
> simultaneous data calls and after connecting asks the receiver to enable
> it's bundle receiving mode so that it interpretes data from both channels
> collectively as if coming from one??? Somehow this is not working.
>
> Has anyone tried this out here?? Am I making some big mistake out here?
i am using a powertel boca ta128 isdn modem. so what i am doing might not be
helpful to you, but this is what i do:
1. I enable support for multilink ppp connections.
2. I then dial to vsnl's 128k number.
at this point i am connected at 64k. now when the traffic increases the
modem automatically dials a second connection and does data bundling. I am
using wvdial for connecting to the net.. Also you can try one thing,.
connect the modem to a windows comp and see if it works!!
Bye,
/\ |\/| |3 /\ r
PS:How do you connect the modem to your computers? Do you use some router or
do you have a high speed serial port?
-----------------------------------------------------
The mailing list archives are available at
http://lists.linux-india.org/cgi-bin/wilma/linux-delhi/
