On Sun, 24 Jan 1999, Lourdes A Jones wrote:
> I can get it to compile (warnings below) but it dies unable to attach the
> modem. Modem is /dev/ttyS1, same config works perfectly with 0.16.5.
Or seems to. You'll have trouble killing an in-progress connect
though because it isn't a distinct process group...
> diald[279]: Trigger: udp 10.0.0.1/1024 128.8.10.90/53
> diald[279]: Calling site 10.0.0.2
> diald[279]: failed to set modem to controlling tty: Operation not permitted
Hmmm... /dev/ttyS1 should have become your controlling tty as soon
as you opened it. Possibilities: diald is not a session leader (it
should be, it calls setsid() early enough), it already has a
controlling terminal (it should not have because it doesn't open
anything but the modem), or diald is not running as root (which
would probably have stopped it dead long ago).
If you do a "ps ax" after starting diald but before it dials it
should have a '?' in the TTY column.
Do you have anything else running on /dev/ttyS1? If so does it
show S1 in the TTY column of a "ps ax"?
Mike
--
.----------------------------------------------------------------------.
| Mike Jagdis | Internet: [EMAIL PROTECTED] |
| 280, Silverdale Road, Earley, | Voice: +44 118 926 6996 |
| Reading RG6 7NU ENGLAND | Work: +44 118 989 0403 |
`----------------------------------------------------------------------'
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
