Hi there,
Has anyone else had problems as listed below or have I just not configured
something. I have included ethertap support in my kernel, configured it as
per the linux/Documentation/networking/ethertap.txt and the diald README.
As far as I know everything is correct but this is what happens when I run
diald.
Mar 22 22:25:19 jeropa diald[1229]: Could not get socket to do packet
monitoring: Socket type not supported
Mar 22 22:25:19 jeropa diald[1229]: Diald is dieing with code 1
Mar 22 22:25:19 jeropa diald[1229]: Can't set line discipline: Invalid
argument
--------- /etc/diald.conf ------------
debug 0x0008
mode ppp
accounting-log /var/log/diald.log
connect /usr/local/bin/ppp-on
disconnect /usr/local/bin/ppp-off
#connect /etc/diald/connect
device /dev/ttyS1
speed 115200
modem
lock
crtscts
local 192.168.0.1
remote 192.168.0.2
dynamic
defaultroute
include /usr/lib/diald/standard.filter
connect-timeout 90
redial-timeout 15
------ end of /etc/diald.conf ---------
------------------------------------------------------
Another message from Jer Wiebe
Find me at...
email: [EMAIL PROTECTED]
ICQ: 4945359
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
