Delete the default route before you start
route del default
should do it.
----- Original Message -----
From: kokin <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 22, 1999 5:56 AM
Subject: PPP can't replace default route
> >From [EMAIL PROTECTED] Thu Apr 22 18:53:48 1999
> Date: Thu, 22 Apr 1999 18:42:56 +0800 (CST)
> From: kokin <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: PPP can't replace default route
>
> Hi all,
>
> I'd like to connect to the net with diald but can't succeed 100%.
> I'm able to fire up the connection script, but the default route
> (through ppp0) can't replace the default route set by diald (through
> sl0).
>
> Below's the log in /var/log/message:
>
> Apr 20 11:24:26 futureit pppd[7808]: Serial connection established.
> Apr 20 11:24:27 futureit pppd[7808]: Using interface ppp0
> Apr 20 11:24:27 futureit pppd[7808]: Connect: ppp0 <--> /dev/ttyS1
> Apr 20 11:24:31 futureit pppd[7808]: not replacing existing default
> route to sl0 [0.0.0.0]
> Apr 20 11:24:31 futureit pppd[7808]: local IP address 202.72.1.194
> Apr 20 11:24:31 futureit pppd[7808]: remote IP address 202.72.0.49
>
> The connection script works fine without diald running.
>
> My config: diald 0.99, ppp 2.3.5 (ppp-2.3.5-1 rpm), pentinum
> redhat 5.2 box.
>
> Any hints? Thanks.
>
> regards,
> kokin from Hong Kong
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
