I have diald 0.99.1 working fine on a RedHat 5.2 on a P-166 and I'm trying
to upgrade to RedHat 6.0 on a PII-400.
After installing RH 6 and configuring diald 0.99.1 like the old system on
my new computer, I tried to test diald and for my surprise it didn't work.
When I ping outside my network, diald dials out,connects, but I dont't get
any response.
I decided to test in a least complex way (starting the pppd by ifup), but
the problem persisted (no response). Finally I tried to ping the remote
adrress of the ppp0 interface and i got no response. Here is what I got
when I ping the remote address:
# ping 200.212.48.198
# tcpdump -i ppp0
11:11:55.391629 200.188.66.176 > 200.212.48.198: icmp: echo request
11:11:56.391632 200.188.66.176 > 200.212.48.198: icmp: echo request
...
11:12:16.391630 200.188.66.176 > 200.212.48.198: icmp: echo request
11:12:17.391706 200.188.66.176 > 200.212.48.198: icmp: echo request
tcpdump: pcap_loop: read: Network is down
#ifconfig
eth0 Link encap:Ethernet HWaddr 00:40:C7:29:80:5E
inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:53 dropped:0 overruns:0 carrier:106
collisions:901 txqueuelen:100
Interrupt:11 Base address:0x6200
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:25 errors:0 dropped:0 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
ppp0 Link encap:Point-to-Point Protocol
inet addr:200.188.66.176 P-t-P:200.212.48.198 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1524 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
/var/messages
Oct 20 11:10:59 mmx ifup-ppp: pppd started for ppp0 on /dev/modem at 38400
...
Oct 20 11:11:24 mmx chat[1088]: CONNECT
Oct 20 11:11:24 mmx chat[1088]: -- got it
Oct 20 11:11:24 mmx chat[1088]: send (^M)
Oct 20 11:11:24 mmx pppd[1086]: Serial connection established.
Oct 20 11:11:24 mmx pppd[1086]: Using interface ppp0
Oct 20 11:11:24 mmx pppd[1086]: Connect: ppp0 <--> /dev/modem
Oct 20 11:11:28 mmx pppd[1086]: Remote message: ^F
Oct 20 11:11:29 mmx pppd[1086]: local IP address 200.188.66.176
Oct 20 11:11:29 mmx pppd[1086]: remote IP address 200.212.48.198
Oct 20 11:12:17 mmx pppd[1086]: Terminating on signal 15.
Oct 20 11:12:17 mmx pppd[1086]: Modem hangup
Oct 20 11:12:17 mmx pppd[1086]: Connection terminated.
Oct 20 11:12:17 mmx pppd[1086]: Connect time 0.9 minutes.
Oct 20 11:12:17 mmx pppd[1086]: Sent 4136 bytes, received 277 bytes.
Oct 20 11:12:17 mmx kernel: ppp: channel ppp0 closing.
Sorry for the long e-mail and thanks in advance
Carlos
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
