I use ppp-2.3.10 and it works fine for me
Beat Bolli
--
dware design & software GmbH
Mattenstrasse 11, CH-2555 Br�gg b. Biel
Telefon: +41 (32) 374 27 00, Telefax: +41 (32) 374 27 01
E-Mail: [EMAIL PROTECTED]
----- Original Message -----
From: Paul Sharpe <[EMAIL PROTECTED]>
To: Carlos Alberto de Almeida Jr <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, October 20, 1999 5:02 PM
Subject: Re: pppd not connecting (me too)
> Not a solution but it might make you feel less lonely to hear that I
> seem to have a very similar problem! RH6.0, PII-400 diald 0.99.1,
> ppp-2.3.7. All of my diagnostics resemble yours, including bringing
> up pppd manually i.e. without diald. Also when I ping
> the local ppp0 interface I get:
>
> ping: sendto: No buffer space available
>
> and in /var/log/messages:
>
> kernel: neighbour table overflow
>
> I'd be interested to hear if you get the same.
>
> In /var/log/messages I also see
>
> SIOCSIFMETRIC: Operation not supported
>
> although I think this is a 'red herring' as I also see that on another
> RH6.0 machine on which diald works fine. My dialup connections work
> fine with the same machine under Windoze fwiw.
>
> Very confused :(
>
> Paul
>
> On Wed, 20 Oct 1999, Carlos Alberto de Almeida Jr wrote:
>
> > I have diald 0.99.1 working fine on a RedHat 5.2 on a P-166 and I'm trying
> > to upgrade to RedHat 6.0 on a PII-400.
> >
> > After installing RH 6 and configuring diald 0.99.1 like the old system on
> > my new computer, I tried to test diald and for my surprise it didn't work.
> > When I ping outside my network, diald dials out,connects, but I dont't get
> > any response.
> >
> > I decided to test in a least complex way (starting the pppd by ifup), but
> > the problem persisted (no response). Finally I tried to ping the remote
> > adrress of the ppp0 interface and i got no response. Here is what I got
> > when I ping the remote address:
> >
> > # ping 200.212.48.198
> >
> > # tcpdump -i ppp0
> > 11:11:55.391629 200.188.66.176 > 200.212.48.198: icmp: echo request
> > 11:11:56.391632 200.188.66.176 > 200.212.48.198: icmp: echo request
> > ...
> > 11:12:16.391630 200.188.66.176 > 200.212.48.198: icmp: echo request
> > 11:12:17.391706 200.188.66.176 > 200.212.48.198: icmp: echo request
> > tcpdump: pcap_loop: read: Network is down
> >
> > #ifconfig
> > eth0 Link encap:Ethernet HWaddr 00:40:C7:29:80:5E
> > inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:53 dropped:0 overruns:0 carrier:106
> > collisions:901 txqueuelen:100
> > Interrupt:11 Base address:0x6200
> >
> > lo Link encap:Local Loopback
> > inet addr:127.0.0.1 Mask:255.0.0.0
> > UP LOOPBACK RUNNING MTU:3924 Metric:1
> > RX packets:25 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> >
> > ppp0 Link encap:Point-to-Point Protocol
> > inet addr:200.188.66.176 P-t-P:200.212.48.198 Mask:255.255.255.255
> > UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1524 Metric:1
> > RX packets:7 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:10
> >
> > /var/messages
> >
> > Oct 20 11:10:59 mmx ifup-ppp: pppd started for ppp0 on /dev/modem at 38400
> > ...
> > Oct 20 11:11:24 mmx chat[1088]: CONNECT
> > Oct 20 11:11:24 mmx chat[1088]: -- got it
> > Oct 20 11:11:24 mmx chat[1088]: send (^M)
> > Oct 20 11:11:24 mmx pppd[1086]: Serial connection established.
> > Oct 20 11:11:24 mmx pppd[1086]: Using interface ppp0
> > Oct 20 11:11:24 mmx pppd[1086]: Connect: ppp0 <--> /dev/modem
> > Oct 20 11:11:28 mmx pppd[1086]: Remote message: ^F
> > Oct 20 11:11:29 mmx pppd[1086]: local IP address 200.188.66.176
> > Oct 20 11:11:29 mmx pppd[1086]: remote IP address 200.212.48.198
> > Oct 20 11:12:17 mmx pppd[1086]: Terminating on signal 15.
> > Oct 20 11:12:17 mmx pppd[1086]: Modem hangup
> > Oct 20 11:12:17 mmx pppd[1086]: Connection terminated.
> > Oct 20 11:12:17 mmx pppd[1086]: Connect time 0.9 minutes.
> > Oct 20 11:12:17 mmx pppd[1086]: Sent 4136 bytes, received 277 bytes.
> > Oct 20 11:12:17 mmx kernel: ppp: channel ppp0 closing.
> >
> > Sorry for the long e-mail and thanks in advance
> >
> > Carlos
> >
> >
> >
> >
> >
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> > the body of a message to [EMAIL PROTECTED]
> >
>
> --
> [EMAIL PROTECTED]
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
