Hello,
On many occations when diald connects I cannot use the internet. This is
because the default route is not set properly as show below.
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
152.158.212.38 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
However without making any changes....if I just reconnect it may get it right
and then all is fine and the routing table is as below. But I still the
two identidical entries for ppp0 a bit strange.
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
152.158.212.39 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
152.158.212.39 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
This problem happens about 30% of the time and I cannot determine what causes
it.
I would appreciate all the help that I can get.
Thanks in advance.
Vikash.
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
