Vikash wrote:
>
> Hello,
>
> On many occations when diald connects I cannot use the internet. This is
> because the default route is not set properly as show below.
>
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
> 152.158.212.38 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
> 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
>
> However without making any changes....if I just reconnect it may get it right
> and then all is fine and the routing table is as below. But I still the
> two identidical entries for ppp0 a bit strange.
>
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
> 152.158.212.39 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
> 152.158.212.39 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
> 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
> 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
>
> This problem happens about 30% of the time and I cannot determine what causes
> it.
>
> I would appreciate all the help that I can get.
>
I can't really help much, especially with the 30% situation, but I
can say that I too see the extra ppp0. I have posted about this
several times but never got an answer. I *think* it's OK.
--
____________________________________________________________________
Robert Paulsen http://paulsen.home.texas.net
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
