Hi,
Thanke You for "noauth" advice, I was not reading pppd manual carefully
- after having defaultroute set by diald it is necessary, BUT
The problem is it's still not running ... i.e. in 4.step (see bottom)
the pppd is started and killed by diald after TIMEOUT !!!
There is 100% problem, that pppd is NOT receiving/sending any data,
because between starting and killing pppd there is no "LCP" record
in "syslog", although pppd runs with "debug" option, probably
diald runs it with wrong device !? There is now no problem with pppd,
because 1.step examination is pretty functional.
Follows original message extended in 4.step:
I am 1'st time user of diald and need help.
Basicaly I need it for modem, but when I found - it's not running, I
decided to
test it on direct line between two linux boxes (RH 6.1) - with the same
result.
Here is shortly written what I was doing:
1. step: I made prefectly runing ppp connection without diald, started
from following script (see included syslog):
/usr/sbin/pppd debug /dev/ttyS1 115200 lock local crtscts connect
"/usr/sbin/chat 'TIMEOUT' '30' '' '' 'gin:--gin:' 'pppuser' 'sword:'
'pas' 'S1' '' "
2. step: I instaled diald-0.99.1-2.rpm and rewrote above script to
/etc/diald.conf like this:
include /usr/lib/diald/standard.filter
mode ppp
connect /etc/diald/connect
redial-timeout 5
device /dev/ttyS1
speed 115200
lock
crtscts
dynamic
local 192.168.1.1
remote 192.168.2.2
defaultroute
debug 0x0088
pppd-options debug noauth <- added after advice
3. step: Starting diald
- proxy device sl0 established ok,
- defaultroute to proxy iface established ok,
- everything seems to be ok
4. step: let's try ping -c 5 123.123.123.123
- ifconfig sl0 is showing TX packets: 10 ok,
- looking to "syslog" on my tty10, chat is passing ok,
- pppd is started by diald - BOOOM
Alhough I am not running any masquearading/firewall I still receive a
message:
"The remote system is required to authenticate itself but I couldn't
find any
secret (password) which would let it use an IP address"
- this message I do not understand - what for authentication is needed
???
I have a feeling like pppd is started for some other terminal / not
ttyS1, as it should be ...
Thanke You for Your prompt answer Noro
Additional config files:
/etc/host.conf:
order hosts,bind
multi on
/etc/resolv.conf: empty
/etc/ppp/options: debug
/etc/hosts: exept of localhost empty
Here follows "syslog":
1.step after starting ppp script as root:
Dec 10 15:29:32 iva modprobe: can't locate module char-major-108
Dec 10 15:29:32 iva pppd[1475]: pppd 2.3.10 started by root, uid 0
Dec 10 15:29:33 iva pppd[1475]: Serial connection established.
Dec 10 15:29:33 iva pppd[1475]: Using interface ppp0
Dec 10 15:29:33 iva pppd[1475]: Connect: ppp0 <--> /dev/ttyS1
Dec 10 15:29:34 iva pppd[1475]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0x9496b5b3> <pcomp> <accomp>]
Dec 10 15:29:34 iva pppd[1475]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0xddaaedaf> <pcomp> <accomp>]
Dec 10 15:29:34 iva pppd[1475]: sent [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0xddaaedaf> <pcomp> <accomp>]
Dec 10 15:29:34 iva pppd[1475]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0x9496b5b3> <pcomp> <accomp>]
Dec 10 15:29:34 iva pppd[1475]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
<compress VJ 0f 01>]
Dec 10 15:29:34 iva pppd[1475]: sent [CCP ConfReq id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Dec 10 15:29:34 iva pppd[1475]: rcvd [IPCP ConfNak id=0x1 <addr
10.20.30.2>]
Dec 10 15:29:34 iva pppd[1475]: sent [IPCP ConfReq id=0x2 <addr
10.20.30.2> <compress VJ 0f 01>]
Dec 10 15:29:34 iva pppd[1475]: rcvd [CCP ConfAck id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Dec 10 15:29:34 iva pppd[1475]: rcvd [IPCP ConfAck id=0x2 <addr
10.20.30.2> <compress VJ 0f 01>]
Dec 10 15:29:37 iva pppd[1475]: rcvd [IPCP ConfReq id=0x1 <addr
10.20.30.1> <compress VJ 0f 01>]
Dec 10 15:29:37 iva pppd[1475]: sent [IPCP ConfAck id=0x1 <addr
10.20.30.1> <compress VJ 0f 01>]
Dec 10 15:29:37 iva pppd[1475]: local IP address 10.20.30.2
Dec 10 15:29:37 iva pppd[1475]: remote IP address 10.20.30.1
Dec 10 15:29:37 iva pppd[1475]: Script /etc/ppp/ip-up started (pid 1477)
3.step - after starting diald (no arguments) from shell prompt as
root...
Dec 10 15:43:58 iva diald[1527]: keepup parsing error. Got token
'tcp.ssl'. Not a known tcp service port.
Dec 10 15:43:58 iva diald[1527]: parse string: 'tcp 120
tcp.dest=tcp.ssl'
Dec 10 15:43:58 iva diald[1527]: keepup parsing error. Got token
'tcp.ssl'. Not a known tcp service port.
Dec 10 15:43:58 iva diald[1527]: parse string: 'tcp 120
tcp.source=tcp.ssl'
Dec 10 15:43:58 iva modprobe: can't locate module tap0
...
Dec 10 15:43:58 iva modprobe: can't locate module tap1
Dec 10 15:43:58 iva kernel: CSLIP: code copyright 1989 Regents of the
University of California
Dec 10 15:43:58 iva kernel: SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR
(dynamic channels, max=256) (6 bit encapsulation enabled).
Dec 10 15:43:58 iva kernel: SLIP linefill/keepalive option.
Dec 10 15:43:58 iva diald[1528]: Proxy device established on interface
sl0
Dec 10 15:43:58 iva diald[1528]: running '/sbin/ifconfig sl0 192.168.1.1
pointopoint 192.168.2.2 broadcast 0.0.0.0 netmask 255.255.255.255 mtu
1500 up'
Dec 10 15:43:58 iva diald[1528]: SIGCHLD[1]: pid 1548 system, status 0
Dec 10 15:43:58 iva diald[1528]: start sl0: Establishing routes for sl0
Dec 10 15:43:58 iva diald[1528]: running '/sbin/route add default metric
1 netmask 0.0.0.0 dev sl0'
Dec 10 15:43:58 iva diald[1528]: SIGCHLD[2]: pid 1549 system, status 0
Dec 10 15:43:58 iva diald[1528]: Changed snoop device to sl0
Dec 10 15:43:58 iva diald[1528]: Diald initial setup completed.
ifconfig sl0:
sl0 Link encap:Serial Line IP
inet addr:192.168.1.1 P-t-P:192.168.2.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
route -rn:
Dec 10 15:45:55 iva last message repeated 3 times
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.2.2 * 255.255.255.255 UH 0 0 0
sl0
127.0.0.0 * 255.0.0.0 U 0 0 0
lo
default * 0.0.0.0 U 1 0 0
sl0
4.step - after ping -c 10 123.123.123.123
Dec 10 15:48:50 iva diald[1528]: Trigger: icmp 192.168.1.1/257
123.123.123.123/257
Dec 10 15:48:50 iva diald[1528]: Calling site 192.168.2.2
Dec 10 15:48:51 iva diald[1528]: running '/etc/diald/connect'
Dec 10 15:48:52 iva diald[1528]: SIGCHLD[3]: pid 1558 dial, status 0
Dec 10 15:48:52 iva diald[1528]: Connected to site 192.168.2.2
*** This is the original log without "noauth" option:
Dec 10 15:48:52 iva diald[1560]: Running pppd: /usr/sbin/pppd
-defaultroute -detach crtscts mtu 1500 mru 1500 debug
Dec 10 15:48:52 iva diald[1528]: Running pppd (pid = 1560).
Dec 10 15:48:52 iva modprobe: can't locate module char-major-108
Dec 10 15:48:52 iva kernel: PPP: version 2.3.7 (demand dialling)
Dec 10 15:48:52 iva kernel: PPP line discipline registered.
Dec 10 15:48:52 iva kernel: registered device ppp0
Dec 10 15:48:52 iva pppd[1560]: The remote system is required to
authenticate itself but I
Dec 10 15:48:52 iva pppd[1560]: couldn't find any secret (password)
which would let it use an IP address.
*** After putting "noauth" it si looking like this:
Dec 12 20:48:52 iva diald[1560]: Running pppd: /usr/sbin/pppd
-defaultroute -detach crtscts mtu 1500 mru 1500 debug noauth
Dec 12 20:48:52 iva diald[1528]: Running pppd (pid = 1065).
Dec 12 20:48:52 iva modprobe: can't locate module char-major-108
Dec 12 20:48:52 iva kernel: PPP: version 2.3.7 (demand dialling)
Dec 12 20:48:52 iva diald[1043]: pppd startup timed out. Check your pppd
options. Killing pppd.
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
