Deti Fliegl writes: > Hi there, > > I bought a new DiSEqC switch which works perfectly with all other > satellite receivers but not with the DVB-S card. There are two different > reasons why it does not work: > > - If using a full DiSEqC message (Addr.0x10, Command 0x38) the timing is > terrible: Between the paritiy bit and the first bit of the next byte > there is a gap which enlarges the last bit by 15%. This makes the DiSEqc > decoder (a PIC 16C505) losing its bit sync. > > - If using a simple SA/SB tone burst it would work, but there is an > error in the implementation of SEC_MINI_B. According to the > specification there should be 9 one's (500us 22khz followed by 1ms 0hz) > within 12.5ms but unfortunately nothing is transmitted. > > I would be very happy if someone could fix the problems in the firmware.
Please try the latest driver/firmware. I hope this fixes it. Ralph -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
