Holger Waechtler wrote: > > Tomi Ollila wrote: > > Friday Sep 27 09:45:17 +0300 2002 Lauri Tischler <[EMAIL PROTECTED]> wrote: > > > >>Tomi Ollila wrote: > >> > >>>It should not be hard to find the exact source code lines where those > >>>are defined (seems to be in dvb.c)... Anyway, it is the application that > >>>sets those values too (i.e.. you need to patch vdr/dvbstream/etc. (also) to > >>>use correct values). > >> > >>Yep, I think I found it, in dvbapi.c the parameter guard-interval is 1_32, > >>it should be 1_8, qam and trans.mode were correct. > > > > > > Hmm, that is true. dvb_defaults.h dvbstream/dvbtune/... has that correct > > in FINLAND settings. > > > > > >>I got following information from Finnish network provider: > >> > >>Network Name :[0]Digita Finland > >>Transport Stream ID : 0x1001 > >>Original Network ID : 0x20F6 > >>Bandwidth : 8MHz > >>Constellation : 64 QAM > >>Hierarchy Information : Non Hierarchical > >>Code Rate : 2/3 > >>Guard Interval : 1/8 > >>Transmission Mode : 8K > >> > >>Maybe this info should be added to drivers and vdr as conditional code > >>for each country. > > > > > > I second that. The way dvbtools does it could be good candidate (If I can > > promote my own suggestion ;) > > > > Even though the final responsibility of setting those values correctly > > is the application, since the driver also sets those (for defaults), > > there should be good mechanism to flexible choose country/area/region > > defaults. > > No, it's nowhere specified that the driver has to set any default > values. It's up to the application to set the correct tuning parameters. > Please fix vdr and dvbstream to use complete channel lists with all > tuning parameters.
VDR will soon use the full DVB-T and DVB-C set of parameters for tuning. Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: [EMAIL PROTECTED] D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
