Klaus Schmidinger wrote: > Holger Waechtler wrote: > >>Tomi Ollila wrote: >> >>>Friday Sep 27 09:45:17 +0300 2002 Lauri Tischler <[EMAIL PROTECTED]> wrote: >>> >>> >>>>Tomi Ollila wrote: >>>> >>>> >>>>>It should not be hard to find the exact source code lines where those >>>>>are defined (seems to be in dvb.c)... Anyway, it is the application that >>>>>sets those values too (i.e.. you need to patch vdr/dvbstream/etc. (also) to >>>>>use correct values). >>>> >>>>Yep, I think I found it, in dvbapi.c the parameter guard-interval is 1_32, >>>>it should be 1_8, qam and trans.mode were correct. >>> >>> >>>Hmm, that is true. dvb_defaults.h dvbstream/dvbtune/... has that correct >>>in FINLAND settings. >>> >>> >>> >>>>I got following information from Finnish network provider: >>>> >>>>Network Name :[0]Digita Finland >>>>Transport Stream ID : 0x1001 >>>>Original Network ID : 0x20F6 >>>>Bandwidth : 8MHz >>>>Constellation : 64 QAM >>>>Hierarchy Information : Non Hierarchical >>>>Code Rate : 2/3 >>>>Guard Interval : 1/8 >>>>Transmission Mode : 8K >>>> >>>>Maybe this info should be added to drivers and vdr as conditional code >>>>for each country. >>> >>> >>>I second that. The way dvbtools does it could be good candidate (If I can >>>promote my own suggestion ;) >>> >>>Even though the final responsibility of setting those values correctly >>>is the application, since the driver also sets those (for defaults), >>>there should be good mechanism to flexible choose country/area/region >>>defaults. >> >>No, it's nowhere specified that the driver has to set any default >>values. It's up to the application to set the correct tuning parameters. >>Please fix vdr and dvbstream to use complete channel lists with all >>tuning parameters. > > > VDR will soon use the full DVB-T and DVB-C set of parameters for tuning.
great! let's hope dvbstream will follow... Holger -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
