Hi, the problem occurs also with DVB-c cards. The first time I noticed the problem was with driver snapshot from 20021022. Therfore I guess the critical change was made in 21st October 2002. Older driver versions don't have these problems, but they don't work with vdr-1.1.15 :-(.
I added a line calling czap in the runvdr script. Since czap manages it sooner or later to tune a channel this is a nice workaround. Please notice: The problem occurs only direct after module initialisation. Once a channel is tuned there is no problem further on. Also a vdr restart with loaded driver causes no problem. But reloading the driver will cause trouble. Sometimes czap reports a lock in the second line, sometimes it takes up to 30 lines until it locks. Status is eiher "00" or "07", signal, snr, ber and unc are changing randomly. I was not able to detect an algorithm or to reproduce the same czap output twice (for example loading the driver direct after a cold start and tuning "Das Erste" causes every time different outputs). best regards Frank Frank Meyering IMST GmbH Information and Communication Systems Carl-Friedrich-Gau� Str. 2 47475 Kamp-Lintfort Tel: + 49 (0)2842 - 981.411 Fax: + 49 (0)2842 - 981.499 E-mail: [EMAIL PROTECTED] Internet: http://www.imst.de Gesch�ftsf�hrer: Prof. Dr.-Ing. Ingo Wolff Dr. Peter Waldow Rheinberg HR B 1855 USt.-ID: DE 811348335 -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
