hello folks, i've been trying to get this damned thing working under linux, but i'm having no luck at all.
modules loaded, in order: (debian /etc/modules) dvb-core dvb_shutdown_timeout=0 dvb-ttpci budget budget-patch tda1004x tda1004x_debug=1 what dmesg says about the above: ttpci_eeprom: module license 'unspecified' taints kernel. Linux video capture interface: v1.00 saa7146: register extension 'dvb'. saa7146: register extension 'budget dvb'. PCI: Found IRQ 5 for device 0000:00:10.0 saa7146: found saa7146 @ mem c8815000 (revision 1, irq 5) (0x13c2,0x1011). DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI). TT-Budget/WinTV-NOVA-T PCI adapter 0 has MAC addr = 00:d0:5c:22:27:c6 saa7146: register extension 'budget_patch dvb'. tda1004x_attach tda1004x_read_byte: reg=0x0 tda1004x_read_byte: success reg=0x0, data=0x25, ret=2 tda1004x: Detected Philips TDA10045H. tda1004x_enable_tuner_i2c tda1004x_write_mask: reg=0x7, mask=0x2, data=0x2 tda1004x_read_byte: reg=0x7 tda1004x_read_byte: success reg=0x7, data=0x0, ret=2 tda1004x_write_byte: reg=0x7, data=0x2 tda1004x_write_byte: success reg=0x7, data=0x2, ret=1 tda1004x: Detected Philips TDM1316L tuner. tda1004x_disable_tuner_i2c tda1004x_write_mask: reg=0x7, mask=0x2, data=0x0 tda1004x_read_byte: reg=0x7 tda1004x_read_byte: success reg=0x7, data=0x2, ret=2 tda1004x_write_byte: reg=0x7, data=0x0 tda1004x_write_byte: success reg=0x7, data=0x0, ret=1 DVB: registering frontend 0:0 (Philips TDA10045H)... try to use the thing; ./scan dvb-t/uk-BlackHill scanning dvb-t/uk-BlackHill using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 634000000 0 2 0 1 0 3 0 initial transponder 682000000 0 1 0 3 0 3 0 >>> tune to: 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_4:HIERARCHY_NONE __tune_to_transponder:1225: ERROR: Setting frontend parameters failed: 22 Invalid argument >>> tune to: 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_4:HIERARCHY_NONE __tune_to_transponder:1225: ERROR: Setting frontend parameters failed: 22 Invalid argument ERROR: initial tuning failed dumping lists (0 services) Done. uk-BlackHill contains the following line "T 634000000 8MHz 2/3 NONE QAM16 2k 1/4 NONE" which is the config for the BBC mux, or so the windows utility says. any help would be appreciated, regards. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
