On Thu, Mar 18, 2004 at 11:03:48PM +0200, Pasi K�rkk�inen wrote:
On Thu, Mar 18, 2004 at 06:21:26PM +0100, Johannes Stezenbach wrote:
Pasi K�rkk�inen wrote:
This sounds interesting. What frontend?I'm using WinTV Nova-t PCI DVB-T budget card with linuxtv-dvb-1.1.0 driver on Linux 2.4.24.
If I run vdr (1.3.6) as the first application after the reboot, I don't get any signal.. mplayer doesn't work either after this. mplayer complains that dvb streaming read fails.
But, If I run mplayer as the first application after the reboot, it works well. After running mplayer, vdr works too. And mplayer works after vdr too in this case :)
So, If I run vdr before mplayer, it somehow breaks the driver.. I guess.
Any ideas? There's no errors in the logs. Reloading the drivers doesn't
help.
If you run vdr before mplayer, only solution is to reboot to get the dvb
card working again.. weird :)
saa7146: register extension 'budget dvb'. saa7146_core: found saa7146 @ mem d0a51000 (revision 1, irq 11) (0x13c2,0x1005). DVB: registering new adapter (TT-Budget/WinTV-NOVA-T PCI). TT-Budget/WinTV-NOVA-T PCI adapter 0 has MAC addr = mac:goes:here DVB: registering frontend 0:0 (Grundig 29504-401)...
This is reproducible for me atleast.. happens every time.The only thing I can imagine is that vdr calls some ioctl before the frontend is fully initialized (the driver should prevent this, of course), and then the frontend crashes and needs to be power-cycled.
Can anyone else reproduce this?
This is the output from mplayer after running vdr:
TUNER TYPE SEEMS TO BE DVB-T code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001 Released under the GPL. Latest version available from http://www.linuxstb.org/ dvb_tune Freq: 554000000 dvb_streaming_read, attempt N. 6 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 5 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 4 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 3 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 2 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 1 failed with errno 11 when reading 2048 bytes dvb_streaming_read, return 0 bytes dvb_streaming_read, attempt N. 6 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 5 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 4 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 3 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 2 failed with errno 11 when reading 2048 bytes dvb_streaming_read, attempt N. 1 failed with errno 11 when reading 2048 bytes dvb_streaming_read, return 0 bytes dvb_streaming_read, attempt N. 6 failed with errno 11 when reading 2048 bytes
.. and gonna reboot :)
-- Pasi K�rkk�inen
^
. .
Linux
/ - \
Choice.of.the
.Next.Generation.
I updated mplayer yesterday, please check it out (I didn't flush the event queue before tuning).
BTW I had loads of problems with 1.1.x drivers, so I reverted to 1.0.x.
Thanks,
Nico
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
