In message <[EMAIL PROTECTED]>, Steven Toth wrote:
hi
>Darron Broad wrote:
>> In message <[EMAIL PROTECTED]>, Steven Toth wrote:
>>
>> Hi Steve.
>>
>>
>>> Darron Broad wrote:
>>>
>> <...>
>>
>>
>>> Has anyone had a chance to try the stoth/hvr4000 tree after the recent
>>> fixes? It's certainly going through the correct motioned for tuning now.
>>> (I don't have a feed available for testing right now).
>>>
>>
>> I just pulled and installed the repo and DVB-S works fine in kaffeine.
>>
>> The combined bug fixes are a success.
>>
>> I don't know how to test DVB-S2, but I will hunt around for a clue.
>>
>>
>I hand modified dvbtune with some extra args to send via the new API (as
>well as the old). I can make that available if you need it, that what I
>used for testing in Europe on Astra 19.2. I patches version 0.05, now
>that I look at the sourceforge.net site, it hasn't changed from 0.5 for
>3 years. :(
>
>This won't help you unless you're running with the multiproto API.
>
>I just assumed other dvb tools (by now) would be updated and I'd drop my
>patches.
Please make this available and I will see if I am able to receive the
HD tests on W3A 7'E. At this time I don't know if my signal is
adequate to pick them up though.
>>> Remember, DiSEqC is not implemented.
>>>
>>
>> Understood. I've resorted to using a nokia 9600s on a priority
>> switch to send diseqc down the wire :-) If you have any idea how
>> Diseqc is done on the hvr4000 please say, it would appreciated
>> and I am willing to investigate and implement if possible.
>>
>>
>
>I have to look back through my notes but this is pretty trivial, let me
>look into this. From memory, we receive a buffer of bytes, we reformat
>the buffer into a cx24116 firmware command and execute it.
Ok. My box describes itself as disecq1.0+burst, therefore I assume
I can test either mode, but is this something you have taken note of?
>In summary then: existing DVBS tuning is working fine (without DiSEqC)
>using the current hvr4000 tree. That's good news.
Yes, it is working very well. Well done, and thanks.
BTW, this is with 2.6.20.2-rc1 and I will test the repo on another machine
running a similar kernel which has various DVB interfaces next week.
Bye
darron
--
// /
{:)==={ Darron Broad <[EMAIL PROTECTED]>
\\ \
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
