e9hack wrote: > Hi, > > the min frequencies of the DVB-C frontends are wrong. In Europe, the center > frequency of the lowest > channel is 50.5MHz and not 51MHz. All known cards with the > stv0297/tda0002x/ves1820 frontend are > able to tune to this frequency. I've changed the range to the lowest channel > - 1/2 bandwidth and the > highest channel + 1/2 bandwidth. For the design of the dvb driver, the > frequency ranges must be part > of the tuner and not of the frontend itself. The same frontend may be used > for different tuners. The > attached patch does only fix the ranges and not the design. >
Now I'm beginning to have doubts about Oliver's original patch: dvb_frontend: Range check of frequency and symbol rate http://linuxtv.org/hg/v4l-dvb/rev/8186a34dd0a6 Should we be checking fe->ops.tuner_ops.info.frequency_min|max , instead of fe->ops.info.frequency_min|max ??? -Mike > Signed-off-by: Hartmut Birr <[EMAIL PROTECTED]> > diff -r 5bb1af77fdc5 linux/drivers/media/dvb/frontends/stv0297.c > --- a/linux/drivers/media/dvb/frontends/stv0297.c Fri Aug 03 18:42:33 > 2007 -0300 > +++ b/linux/drivers/media/dvb/frontends/stv0297.c Mon Aug 06 19:14:31 > 2007 +0200 > @@ -680,8 +680,8 @@ static struct dvb_frontend_ops stv0297_o > .info = { > .name = "ST STV0297 DVB-C", > .type = FE_QAM, > - .frequency_min = 64000000, > - .frequency_max = 1300000000, > + .frequency_min = 47000000, > + .frequency_max = 862000000, > .frequency_stepsize = 62500, > .symbol_rate_min = 870000, > .symbol_rate_max = 11700000, > diff -r 5bb1af77fdc5 linux/drivers/media/dvb/frontends/tda10021.c > --- a/linux/drivers/media/dvb/frontends/tda10021.c Fri Aug 03 18:42:33 > 2007 -0300 > +++ b/linux/drivers/media/dvb/frontends/tda10021.c Mon Aug 06 19:14:31 > 2007 +0200 > @@ -439,8 +439,8 @@ static struct dvb_frontend_ops tda10021_ > .name = "Philips TDA10021 DVB-C", > .type = FE_QAM, > .frequency_stepsize = 62500, > - .frequency_min = 51000000, > - .frequency_max = 858000000, > + .frequency_min = 47000000, > + .frequency_max = 862000000, > .symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */ > .symbol_rate_max = (XIN/2)/4, /* SACLK/4 */ > #if 0 /* keep */ > diff -r 5bb1af77fdc5 linux/drivers/media/dvb/frontends/tda10023.c > --- a/linux/drivers/media/dvb/frontends/tda10023.c Fri Aug 03 18:42:33 > 2007 -0300 > +++ b/linux/drivers/media/dvb/frontends/tda10023.c Mon Aug 06 19:14:31 > 2007 +0200 > @@ -504,8 +504,8 @@ static struct dvb_frontend_ops tda10023_ > .name = "Philips TDA10023 DVB-C", > .type = FE_QAM, > .frequency_stepsize = 62500, > - .frequency_min = 51000000, > - .frequency_max = 858000000, > + .frequency_min = 47000000, > + .frequency_max = 862000000, > .symbol_rate_min = (SYSCLK/2)/64, /* SACLK/64 == > (SYSCLK/2)/64 */ > .symbol_rate_max = (SYSCLK/2)/4, /* SACLK/4 */ > #if 0 > diff -r 5bb1af77fdc5 linux/drivers/media/dvb/frontends/ves1820.c > --- a/linux/drivers/media/dvb/frontends/ves1820.c Fri Aug 03 18:42:33 > 2007 -0300 > +++ b/linux/drivers/media/dvb/frontends/ves1820.c Mon Aug 06 19:14:31 > 2007 +0200 > @@ -410,8 +410,8 @@ static struct dvb_frontend_ops ves1820_o > .name = "VLSI VES1820 DVB-C", > .type = FE_QAM, > .frequency_stepsize = 62500, > - .frequency_min = 51000000, > - .frequency_max = 858000000, > + .frequency_min = 47000000, > + .frequency_max = 862000000, > .caps = FE_CAN_QAM_16 | > FE_CAN_QAM_32 | > FE_CAN_QAM_64 | _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
