2007/9/17, Luca Olivetti <[EMAIL PROTECTED]>: > > En/na Moisés Pérez ha escrit: > > [again, I ask you to keep the discussion on the mailing list ]
Sorry, but gmail have sent the mail automatically to your personal mail, I realized now....sorry!! (my first mail list) > > > I've tried configure lirc with af9005-remote and with af9005-lirc, but > > when i try run irrecord, it says that lirc is not configured. In > > /etc/lirc/hardware.conf, i don't know what driver must been used. > > below you say that you have an error loading dvb-usb-af9005-lirc.ko , so > that's not suprising: if the module doesn't load it's not going to work > [...] Yes, below is explained > Seen that I can't configure lirc with af9005-lirc module and > > af9005-remote doesn't work, I've tried to get the IR string but nothing > > happens. > > > > I've probed with af9005-remote and af9005-lirc (I know that would use > > the first one) including the debug=1 option in module charging. > > > > sudo rmmod -f dvb_usb_af9005_remote > > sudo modprobe dvb_usb_af9005_remote debug=1 > > > > Nothing appears on syslog pressing keys. > > so either your modprobe is ignoring command line switches (it happened > to me), or you didn't enable debug while compiling the modules (if you > use the mercurial tree I think it's enabled by default), or your syslog > daemon is sending messages somewhere else. > > > > With af9005-lirc, charging it as here is explained > > < http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015612.html > >,I've > > gotten an error, I report it: > > > > $-sudo modprobe dvb-usb-af9005-lirc debug=1 > raw_code_log > > FATAL: Error inserting dvb_usb_af9005_lirc > > (/lib/modules/2.6.20-16-generic/kernel/drivers/media/dvb/dvb-usb/dvb- > usb-af9005-lirc.ko): > > Unknown symbol in module, or unknown parameter (see dmesg) > > Well, see dmesg to see what's the missing symbol. BTW, the redirection > here does nothing (or maybe that's the cause for the error). I've tried to load the af9005-lirc module with the device unplugged (to see the debug) and it doesn't work, the error is the same $ sudo modprobe dvb-usb-af9005-lirc debug=1 FATAL: Error inserting dvb_usb_af9005_lirc (/lib/modules/2.6.20-16-generic/kernel/drivers/media/dvb/dvb-usb/dvb- usb-af9005-lirc.ko): Unknown symbol in module, or unknown parameter (see dmesg) $dmesg: [ 2953.248000] dvb_usb_af9005_lirc: Unknown symbol lirc_unregister_plugin [ 2953.248000] dvb_usb_af9005_lirc: Unknown symbol lirc_register_plugin My kernel version is 2.6.20-16-generic installed by apt-get from ubuntu repository. Lirc version is lirc-0.8.2, installed by apt-get too. Should it work if I compile lirc instead of using pre-compiled packages?¿ > Thank you very much for your help!! > > I thing that my remote is different of yours and it doesn't > > work....neither with af9005-remote or with af9005-lirc (because I can't > > [don't know how] configure it. > > > with the dvb-usb-af9005-lirc module it should work with any remote, it's > only (much) more convoluted to setup. I see it!! But my remote (see it on link<http://img85.imageshack.us/my.php?image=p9160087cp0.jpg>) doesn't work correctly with the af9005-remote driver provided by linux-dvb sources. It creates a input device that I can't get any input from it, or directly doesn't appear the just created devide on my /dev/input. Thanks for your help and sorry for not keeping the discussion on the list (I haven't realized)...sorry to all!! Bye > -- > Luca > > > _______________________________________________ > linux-dvb mailing list > [email protected] > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
_______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
