No, not use rotor yet...
----- Original Message -----
From: Simeon Simeonov
To: Придворов Андрей ; linux-dvb
Sent: Tuesday, February 12, 2008 11:24 AM
Subject: Re: [linux-dvb] mantis vp1041 with strange diseqc rotor commands
Thanks Андрей,
Do you have a rotor? If it works OK which program do you use to drive it?
----- Original Message ----
From: Придворов Андрей <[EMAIL PROTECTED]>
To: linux-dvb <linux-dvb@linuxtv.org>
Sent: Monday, February 11, 2008 3:45:02 PM
Subject: Re: [linux-dvb] mantis vp1041 with strange diseqc rotor commands
I think, this is becouse "Initial support for Mantis VP-1041" not usability
yet.
I use patch from Hans Werner for 1041, works better.
----- Original Message -----
From: Simeon Simeonov
To: linux-dvb
Sent: Tuesday, February 12, 2008 6:47 AM
Subject: [linux-dvb] mantis vp1041 with strange diseqc rotor commands
Hi,
I am using the latest mantis drivers from Manu's repository:
http://jusst.de/hg/mantis/
with my Azureware twinhan vp1041 based card.
Locking to DVB-S channels works fine almost all the time with the patched
szap or patched mythtv.
Did not try DVB-S2 yet. But what I am having troubles now is the diseqc. I
have a switch behind a diseqc 1.2 rotor (goto stored positions).
The switching works fine under Windoz. I have no problems also using it
with my other card in the same box - Twinhan 102g.
Initially with the vp1041 card after a couple of diseqc commands I would
get stb0899_diseqc_fifo_empy timeout. It turned out that I had to use some very
long pauses before sending a repeat command. If
for the 102g standart 15ms worked fine, for the vp1041 I had to use 1s!
pause. Then the rotor will start
moving very slowly with small steps - as if it is does one step , stops
and then continues to the desired position.If one is patient enough the rotor
gets to the desired position. I checked using voltmeter the voltages that come
out of the card and they seem to be good. For sending the commands I used both
mythtv and hacked version of Michel Verbraak's gotox program.
Has anyone experienced something similar with stb0899 frontend? Perhaps you
can give me an idea what might be going wrong?
Thanks,
Simeon
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv..org/cgi-bin/mailman/listinfo/linux-dvb
-----Inline Attachment Follows-----
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
------------------------------------------------------------------------------
Looking for last minute shopping deals? Find them fast with Yahoo! Search._______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
