I think, this is becouse "Initial support for Mantis VP-1041" not usability yet.
I use patch from Hans Werner for 1041, works better.
  ----- Original Message ----- 
  From: Simeon Simeonov 
  To: linux-dvb 
  Sent: Tuesday, February 12, 2008 6:47 AM
  Subject: [linux-dvb] mantis vp1041 with strange diseqc rotor commands


  Hi,

  I am using the latest mantis drivers from Manu's repository:
  http://jusst.de/hg/mantis/
  with my Azureware twinhan vp1041 based card.
  Locking to DVB-S channels works fine almost all the time with the patched 
szap or patched mythtv.
  Did not try DVB-S2 yet. But what I am having troubles now is the diseqc. I 
have a switch behind a diseqc 1.2 rotor (goto stored positions).
  The switching works fine under Windoz. I have no problems also using it with 
my other card in the same box - Twinhan 102g.
  Initially with the vp1041 card after a couple of diseqc commands I would get 
stb0899_diseqc_fifo_empy timeout. It turned out that I had to use some very 
long pauses before sending a repeat command. If 
  for the 102g standart 15ms worked fine, for the vp1041 I had to use 1s! 
pause. Then the rotor will start
   moving very slowly with small steps  - as if it is does one step , stops and 
then continues to the desired position.If one is patient enough the rotor gets 
to the desired position. I checked using voltmeter the voltages that come out 
of the card and they seem to be good. For sending the commands I used both 
mythtv and hacked version of Michel Verbraak's gotox program.
  Has anyone experienced something similar with stb0899 frontend? Perhaps you 
can give me an idea what might be going wrong?

  Thanks,
  Simeon





        
____________________________________________________________________________________
  Be a better friend, newshound, and 
  know-it-all with Yahoo! Mobile.  Try it now.  
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 


  _______________________________________________
  linux-dvb mailing list
  linux-dvb@linuxtv.org
  http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to