Seppo Ingalsuo wrote:
> Simeon Simeonov wrote:
>> Did you try changing line 250 in mantis_dvb.c to:
>>                 if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL, 
>> LNBP21_ISEL)) {
>>   
> I tried mantis-a9ecd19a37c9. Without the change success in positioning 
> was about 0% similarly as with multiproto-0448e5a6d8a6. After this 
> change the success in zapping between different satellite positions 
> increased to about 40% so it looks now promising and vdr satellite 
> channels are usable with some patience :^)


You mean the LNBP21 attach line improved things for you by 40% ?

> Is there some kind of soft-diseqc bit timing used with this DVB-S2 card 
> or driver SW (I didn't yet look at the source) or why is the operation 
> so unreliable? I had to use command duplication in vdr-rotor plugin with 
> my old card but with that it was about 100% reliable.

If you can really identify what is "really" unreliable, that itself will 
be a help
to fix the issue, in most cases.

> Which DVB-S2 multiproto driver tree should I follow for latest 
> development for TT S2-3200 (/Skystar HD)?

For the SAA7146 based cards, use the multiproto tree, for the Mantis based
cards, use the mantis tree.

Regards,
Manu


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Reply via email to