James wrote:
Michael Tautschnig wrote:
[...]
Concerning Volume Groups:
I'd suggest adding in your documentation that something like the
following won't work because of "-" after the volume group sizes.
And saying that volume group sizes must be EXACT or you'll get a
generic error from parted saying that /dev/sda has a bad label
Bad disk_config file:
[...]
Oh, this is not intended behavior, that's a bug. Could you re-run
that with the
bad config and debug=1 and mail the output?
Thanks,
Michael
here's the output for the error attached in a .log file
-James
Oh i also noticed one thing.
Without mdadm installed in the client packages it won't mount
/dev/mapper/volume-*
dunno if that's a bug or not.
Error =
Check root=bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls /dev
ALERT! /dev/mapper/lvmtest-root does not exist. dropping to shell!
But it seems that the lvm setup turns things into some type of raid array?
I'm not installing a raid setup by the way i'm using the same lvm setup
from configs in the previous messages in the thread
Hope this helps some debugging
-James
