Hi Bruno,

I've got a small suggestion below.
But regardless that, your patch looks fine.

On 12/03/2013 04:23 PM, Bruno Randolf wrote:
> This patch adds support for the GPIOs found on the SMSC "Super I/O" chips
> SCH311x.
>
> The chip detection and I/O functions are copied from sch311x_wdt.c
>
> Signed-off-by: Bruno Randolf <[email protected]>
>
> ---
> Notes:
> - All GPIOs are now supported, driver data is runtime allocated
>   and I tried to address all comments as far as possible.
> - Still a platform device is registered, similar to gpio-f7188x.c
> ---
>  drivers/gpio/Kconfig        |   9 +
>  drivers/gpio/Makefile       |   1 +
>  drivers/gpio/gpio-sch311x.c | 430 
> ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 440 insertions(+)
>  create mode 100644 drivers/gpio/gpio-sch311x.c
>

[snip]

> +static int __init sch311x_gpio_init(void)
> +{
> +     int err, i, found = 0;
> +     unsigned short addr = 0;
> +
> +     for (i = 0; !found && i < ARRAY_SIZE(sch311x_ioports); i++)
> +             if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
> +                     found++;

'found' variable isn't necessary here. Just turn it into a label placed
below
'return -ENODEV' then 'goto found' directly.

> +     if (!found)

This 'if' wouldn't be necessary anymore.
You'd call return unconditionally at this point.

Br, David Cohen

> +             return -ENODEV;
> +
> +     err = platform_driver_register(&sch311x_gpio_driver);
> +     if (err)
> +             return err;
> +
> +     err = sch311x_gpio_pdev_add(addr);
> +     if (err)
> +             goto unreg_platform_driver;
> +
> +     return 0;
> +
> +unreg_platform_driver:
> +     platform_driver_unregister(&sch311x_gpio_driver);
> +     return err;
> +}
> +
> +static void __exit sch311x_gpio_exit(void)
> +{
> +     platform_device_unregister(sch311x_gpio_pdev);
> +     platform_driver_unregister(&sch311x_gpio_driver);
> +}
> +
> +module_init(sch311x_gpio_init);
> +module_exit(sch311x_gpio_exit);
> +
> +MODULE_AUTHOR("Bruno Randolf <[email protected]>");
> +MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:gpio-sch311x");

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to