When using serial port SCIFB1_B, transmit works, but nothing is
received.
Receive fails because the SCIFB1_SCK_B settings configure the wrong
value for the sel_scifb1 field in the Module Select Register (MOD_SEL),
due to an ambiguity in the R-Car M2-W and M2-N datasheets.
Tested on r8a7791/koelsch using pins 53 (TXD) and 72 (RXD) on EXIO
Connector A.
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
Against next-20150910.
s/PINMUX_IPSR_MODSEL_DATA/PINMUX_IPSR_MSEL/ to apply on
renesas-drivers-2015-09-08-v4.2.
drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index ee41eb10ef3636d7..622841954f4b9ab4 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -889,7 +889,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_DATA(IP2_2_0, DACK1),
PINMUX_IPSR_MODSEL_DATA(IP2_2_0, SCIFA1_TXD_C, SEL_SCIFA1_2),
PINMUX_IPSR_MODSEL_DATA(IP2_2_0, SCIFB1_TXD_C, SEL_SCIFB1_2),
- PINMUX_IPSR_MODSEL_DATA(IP2_2_0, SCIFB1_SCK_B, SEL_SCIFB1_0),
+ PINMUX_IPSR_MODSEL_DATA(IP2_2_0, SCIFB1_SCK_B, SEL_SCIFB1_1),
PINMUX_IPSR_DATA(IP2_2_0, A20),
PINMUX_IPSR_MODSEL_DATA(IP2_4_3, SPCLK, SEL_QSP_0),
PINMUX_IPSR_DATA(IP2_6_5, A21),
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
