On Thu, Sep 10, 2015 at 5:17 AM, Geert Uytterhoeven <geert+rene...@glider.be> wrote:
> When using serial port SCIFB1_B, transmit works, but nothing is > received. > > Receive fails because the SCIFB1_SCK_B settings configure the wrong > value for the sel_scifb1 field in the Module Select Register (MOD_SEL), > due to an ambiguity in the R-Car M2-W and M2-N datasheets. > > Tested on r8a7791/koelsch using pins 53 (TXD) and 72 (RXD) on EXIO > Connector A. > > Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be> > --- > Against next-20150910. > > s/PINMUX_IPSR_MODSEL_DATA/PINMUX_IPSR_MSEL/ to apply on > renesas-drivers-2015-09-08-v4.2. Acked-by: Linus Walleij <linus.wall...@linaro.org> Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
