Hi, On Tue, Feb 19, 2008 at 03:38:46AM -0600, Michael Brennen wrote: > On Sun, 17 Feb 2008, Michael Brennen wrote: > >> Heartbeat 2.1.3, crm enabled >> >> I've built an initial drbd master/slave on two systems, lvc7 and lvc8, >> following http://www.linux-ha.org/DRBD/HowTov2. The drbd is coming alive >> in P/S mode, but it will not fail over when I kill the master; the slave >> stays in secondary. stonith was not working, so I've decided to make that >> work in v2 (I had it working in a v1 build about a month ago.) >> ..... >> Then, I am trying to define the stonith device in xml; the source to the >> apc3.xml file is attached. I am adding from a separate command line: > > Just to clear this up, I found my own silly problem: I had misspelled one > of the parameters (password, not passwd) for the apcmaster stonith device > in the xml.
Does that mean that the patch you posted is not necessary? > The stonith daemons start successfully now, but with a monitor interval of > 15s one of the two fails fairly quickly. The apc (9211 masterswitch) only > allows a single login, and I wonder if the two daemons aren't colliding, > and one is timing out and giving up. Did you take a look at the logs to confirm this? Thanks, Dejan > Fortunately this is a test cluster; > from what I have seen I would never put this pdu in production. I will > work with an external/ssh stonith setup to see if I can't avoid the > problems with the apc. > > -- Michael > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
