Hi, On Fri, Feb 22, 2008 at 05:29:08PM +0100, Johan Hoeke wrote: > Dejan Muhamedagic wrote: > > Hi, > <snip> > > >> I'm due to test the cluster > >> again this afternoon. We're going to pull out the heartbeat cable to > >> test and make sure the data doesn't get corrupted. Stonith / riloe has > >> worked well, except that one time apparently. > > > > But the stonith resource is monitored? How did it fail? > > Monitored: not sure if it was before, but it is now. > > How did it fail: haven't had the time to analyze it properly. Needs to > be done though. > > This afternoon's test went well fortunately. Stonith amongst other > things. Pulling the heartbeat network cable resulted in nodeA shooting > nodeB. Then when nodeB rebooted, it shot nodeA. NodeA shot nodeB again > etc. We'll switch to from power reset to power off probably. We'll > discuss that RSN.
The shooting match :) Yes, either change from reset to poweroff or don't start heartbeat automatically on boot. > have a good weekend and thanks for your time. Thanks. You're welcome. Dejan > > regards, > > Johan > > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
