Hello list!
I've followed through the Getting Started guide for v2 on the linux-ha.org
site, and can't get it to run. Whenever I try starting, it only logs the
following two lines, which don't really help:
heartbeat[17690]: 2008/03/28_14:28:44 ERROR: Heartbeat not started:
configuration error.
heartbeat[17690]: 2008/03/28_14:28:44 ERROR: Configuration error, heartbeat
not started.
I'm running heartbeat 2.0.7 on Fedora from Fedora's official RPM release.
The 192.168.42.x subnet is on eth0, eth1 is a dedicated private link between
the two HA hosts. Node names are taken from uname -n as instructed.
Here is my /etc/had/ha.cf:
use_logd off
logfile /var/log/ha-log
debugfile /var/log/ha-debug
keepalive 1
deadtime 5
initdead 60
udpport 694
ping 192.168.42.8
bcast eth1
auto_failback off
node ha1 ha2
crm respawn
Here is my /var/lib/heartbeat/crm/cib.xml:
<cib>
<configuration>
<crm_config/>
<nodes/>
<resources>
<primitive id="ip_resource" class="ocf" type="IPaddr"
provider="heartbeat">
<instance_attributes>
<attributes>
<nvpair name="ip" value="192.168.42.10"/>
</attributes>
</instance_attributes>
</primitive>
</resources>
<constraints>
<rsc_location id="run_ip_resource" rsc="ip_resource">
<rule id="pref_run_ip_resource" score="100">
<expression attribute="#uname" operation="eq" value="ha1"/>
</rule>
</rsc_location>
</constraints>
</configuration>
<status/>
</cib>
And finally, /etc/ha.d/authkeys:
auth 1
1 sha1 foofoofoofoo
Any pointers? I'm completely lost since both the debug file and logfile
have no specific errors in them.
Thanks!
~Eric
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
