Hi Thank you for your reply this video may show the better idea with configuration and video of the 3 nodes and the problem i have.. http://www.youtube.com/watch?v=jCCqRGF90RE
When lb1 was suspended via vmware immediately the lb2 and lb3 start to listen to lb1's virtual ip address what i want is that only lb3 listens to lb1's virtual ip and then when lb3 is goes down(suspended via vmware) the lb2 to listen lb1's virtual ip which is 192.168.19.101 and how do i do that? Problem: When load balancer 1 is down then the load balancer 2 and load balancer 3 automatically listen to virtual IP of load balancer 1 Setup: 3 Nodes, 2 Active 1 Backup Load Balancer 1= Front end Load Balancer 2= Front end Load Balanccr 3= Backup lb1 Virtual IP = 192.168.19.101 lb2 Virtual IP = 192.168.19.102 lb1 Physical IP = 192.168.19.128 lb2 Physical IP = 192.168.19.135 lb3 Physical IP = 192.168.19.132 I hope you guys can understand my poor English this time Thanks Joe On Fri, Oct 23, 2009 at 10:42 PM, Dejan Muhamedagic <[email protected]>wrote: > Hi, > > On Fri, Oct 23, 2009 at 07:42:05PM +0800, Joe P.H. Chiang wrote: > > I have some trouble setting this up. > > > > I have 3 Nodes > > LB1 : listen to 10.10.10.1 > > LB2 : listen to 10.10.10.2 > > LB3 : backup node for lb1 & lb2 > > > > > > Setup1 > > if LB1 goes DOWN.. LB3(backup node) goes UP then, if LB3(backup node) > DOWN > > then LB2 will host (LB1+LB2) eth0:0 = 10.10.10.1 + eth0:1= 10.10.10.2 > > Not sure what do you mean with goes up/down. > > > same goes for LB2 > > > > Setup2 > > if LB2 DOWN.. LB3(backup node) goes UP then, if LB3(backup node) DOWN > then > > LB1 will host (LB1+LB2) eth0:0 = 10.10.10.2 + eth0:1= 10.10.10.1 > > > > Problem: Setup1 > > when LB1 goes DOWN then LB3 and LB2 will BOTH host the IP of LB1. > > or > > when LB2 goes DOWN then LB1 and LB3 will BOTH host the IP of LB2 > > You mean one non-cloned resource runs on two nodes? That > shouldn't happen. It can happen on split-brain and quorum > ignored. > > > hmm is there any reason why? > > > > kinda hard to explain this.. > > Kinda hard to help without logs and configuration. > > Thanks, > > Dejan > > > _______________________________________________ > > Linux-HA mailing list > > [email protected] > > http://lists.linux-ha.org/mailman/listinfo/linux-ha > > See also: http://linux-ha.org/ReportingProblems > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > -- Thanks, Joe _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
