Hi, On Mon, Oct 26, 2009 at 12:53:32PM +0800, Joe P.H. Chiang wrote: > Hi Thank you for your reply > this video may show the better idea with configuration and video of the 3 > nodes and the problem i have.. > http://www.youtube.com/watch?v=jCCqRGF90RE
Watching videos is great, but there's not much substance in it :) > When lb1 was suspended via vmware > immediately the lb2 and lb3 start to listen to > lb1's virtual ip address That's confusing. A single (not cloned) resource instance should run only on one node. > what i want is that only lb3 listens to lb1's virtual ip > > and then when lb3 is goes down(suspended via vmware) the lb2 to listen lb1's > virtual ip which is 192.168.19.101 > > and how do i do that? By using location constraints (node preferences). Can you please post your configuration and the logs. You can use hb_report. Thanks, Dejan > > Problem: > When load balancer 1 is down then the load balancer 2 and load balancer 3 > automatically listen to virtual IP of load balancer 1 > > Setup: 3 Nodes, 2 Active 1 Backup > Load Balancer 1= Front end > Load Balancer 2= Front end > Load Balanccr 3= Backup > > lb1 Virtual IP = 192.168.19.101 > lb2 Virtual IP = 192.168.19.102 > > lb1 Physical IP = 192.168.19.128 > lb2 Physical IP = 192.168.19.135 > lb3 Physical IP = 192.168.19.132 > > I hope you guys can understand my poor English this time > Thanks > > Joe > > > > > On Fri, Oct 23, 2009 at 10:42 PM, Dejan Muhamedagic > <[email protected]>wrote: > > > Hi, > > > > On Fri, Oct 23, 2009 at 07:42:05PM +0800, Joe P.H. Chiang wrote: > > > I have some trouble setting this up. > > > > > > I have 3 Nodes > > > LB1 : listen to 10.10.10.1 > > > LB2 : listen to 10.10.10.2 > > > LB3 : backup node for lb1 & lb2 > > > > > > > > > Setup1 > > > if LB1 goes DOWN.. LB3(backup node) goes UP then, if LB3(backup node) > > DOWN > > > then LB2 will host (LB1+LB2) eth0:0 = 10.10.10.1 + eth0:1= 10.10.10.2 > > > > Not sure what do you mean with goes up/down. > > > > > same goes for LB2 > > > > > > Setup2 > > > if LB2 DOWN.. LB3(backup node) goes UP then, if LB3(backup node) DOWN > > then > > > LB1 will host (LB1+LB2) eth0:0 = 10.10.10.2 + eth0:1= 10.10.10.1 > > > > > > Problem: Setup1 > > > when LB1 goes DOWN then LB3 and LB2 will BOTH host the IP of LB1. > > > or > > > when LB2 goes DOWN then LB1 and LB3 will BOTH host the IP of LB2 > > > > You mean one non-cloned resource runs on two nodes? That > > shouldn't happen. It can happen on split-brain and quorum > > ignored. > > > > > hmm is there any reason why? > > > > > > kinda hard to explain this.. > > > > Kinda hard to help without logs and configuration. > > > > Thanks, > > > > Dejan > > > > > _______________________________________________ > > > Linux-HA mailing list > > > [email protected] > > > http://lists.linux-ha.org/mailman/listinfo/linux-ha > > > See also: http://linux-ha.org/ReportingProblems > > _______________________________________________ > > Linux-HA mailing list > > [email protected] > > http://lists.linux-ha.org/mailman/listinfo/linux-ha > > See also: http://linux-ha.org/ReportingProblems > > > > > > -- > Thanks, > Joe > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
