Ciao, sorry ... I had time only on these days to test your xml. what I've done
- put your code in a file => stonith.xml - cibadmin -C -o resources --xml-file stonith.xml the above command wrote the cib.xml but the "fencedev" resource didn't start. In attachment you will find the output of the hb_report command. Thanks so much for any help cristina On Sep 11, 2009, at 7:07 PM, Dejan Muhamedagic wrote: > Ciao, > > On Fri, Sep 11, 2009 at 12:31:30PM +0200, Cristina Bulfon wrote: >> Ciao, >> >> I will open a bugzilla.. I should be expert now :-) > > :) > >> and yes the device name is the same .. do you have some xml example >> to >> show me ? > > Sure: > > <clone id="Fence-clone"> > <instance_attributes> > <attributes> > <nvpair name="clone_max" value="2"/> > <nvpair name="clone_node_max" value="1"/> > </attributes> > </instance_attributes> > <primitive id="fencedev" class="stonith" type="external/sbd"> > <operations> > <op name="monitor" interval="120s" timeout="60s" > prereq="nothing"/> > <op name="start" timeout="60s" prereq="nothing"/> > </operations> > <instance_attributes> > <attributes> > <nvpair name="sbd_device" value="YOUR disk device"/> > </attributes> > </instance_attributes> > </primitive> > </clone> > > Basically, all stonith configurations are the same. Just change > the instance attributes and timeouts. This example may or may not > work, perhaps there are some ids missing, didn't try XML for such > a long time :) > > Thanks, > > Dejan > >> thanks >> >> cristina >> On Sep 11, 2009, at 12:25 PM, Dejan Muhamedagic wrote: >> >>> Ciao, >>> >>> On Fri, Sep 11, 2009 at 12:04:23PM +0200, Cristina Bulfon wrote: >>>> Ciao, >>>> >>>> I've configured a SBD device for checking the Shared disk trough >>>> the >>>> SAN. >>>> My 2 node cluster have installed a Dual Path Qlogic FC cards with >>>> failover, if i try to unplug >>>> one FC port on my active machine .. SBD does the reboot to the >>>> machine >>>> w/o >>>> waiting for the failover. Reading the http://www.linux-ha.org/SBD_Fencing >>>> >>>> I can manage the timeout parameters but it doesn't work on my >>>> machines, I get >>>> invalid option >>>> >>>> sbd -d /dev/AFS/sdg -4 20 -1 10 create >>>> >>>> sbd: invalid option -- 4 >>> >>> Please file a bugzilla for this. >>> >>>> I am using heartbeat 2.1.4 and I cannot move up since my python >>>> version is 2.3.4 >>>> >>>> For testing SBD with HA I've created a simple resource and it has >>>> been >>>> worked, >>>> but I saw that most of the people create a clone. Which is the best >>>> way to use SBD ? >>> >>> I think clones should be OK, of course if you use the same device >>> name on all nodes. >>> >>> Thanks, >>> >>> Dejan >>> >>>> Any hint for the xml configuration to use SBD with 2 node cluster ? >>>> >>>> Thanks >>>> >>>> PS: next week I will be read email time to time, sorry in >>>> advance if >>>> I cannot answer soon. >>>> >>>> cristina >>>> _______________________________________________ >>>> Linux-HA mailing list >>>> [email protected] >>>> http://lists.linux-ha.org/mailman/listinfo/linux-ha >>>> See also: http://linux-ha.org/ReportingProblems >>> _______________________________________________ >>> Linux-HA mailing list >>> [email protected] >>> http://lists.linux-ha.org/mailman/listinfo/linux-ha >>> See also: http://linux-ha.org/ReportingProblems >>> >> >> _______________________________________________ >> Linux-HA mailing list >> [email protected] >> http://lists.linux-ha.org/mailman/listinfo/linux-ha >> See also: http://linux-ha.org/ReportingProblems > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
