Hi all I'm a newbie of Linux-HA. My final target is to setup a simple 2 nodes cluster with a only one virtual IP address. I have a couple of PCs running heartbeat 2.1.4-2 (Ubuntu 9.0.4). The PCs are named fabio-laptop and ws-mythtv-9 Their IP addresses are respectively fabio-laptop: 192.168.2.10 ws-mythtv-9: 192.168.2.15
My ha.cf file is autojoin any udpport 694 bcast eth0 warntime 5 deadtime 15 initdead 60 keepalive 2 node fabio-laptop node ws-mythtv-9 auto_failback off debugfile /var/log/ha-debug logfile /var/log/ha-log # Logging debug 1 coredumps true logfacility daemon crm respawn Of course this file has been replicated on both the PCs. My haresources is: fabio-laptop 192.168.2.154 In other words I would like to have a virtual IP address 192.168.2.154 in high availability. I run both the heartbeat daemons but I cannot see the eth0:0 assigned to the Active PC (fabio-laptop). Should I see the eth0:0 created at boot time or not? The hearbeat channel seems to be working because if I shutdown one of the linux box (either fabio-laptop pr ws-mythtv-9) I see that the remote part detects such event. Anyway I cannot see the eth0:0 virtual interface defined in any case. Probably I have a basic setup problem. Have I to write some additional file or to provide some additional info to heartbeat and crm daemons? Please let me know if you need some more details or log info. Any help will be appreciated. Regards fabio antonini -- Fabio Antonini PhD SW Designer Kasko Networks srl Loc.Boschetto, zona ind.le di Pile 67100 L'Aquila _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
