Because I need that at the very first time I do //etc/init.d/corosync
start/ the time to be available
on only one node of the HA cluster_ is reduced to minimum_, and to get
this, I need
to have values of 5s for both (I've tested after modification via CRM
API and stop and start again, it starts
fine with 5s) , so then I can configure all the things via CRM API and
end the configuration
by re-set the dc-deadtime and cluster-delay to their defaults values
(60s) so that Pacemaker will
then work correctly as usual. I mean the setting of 5s is of course not
to be used once
the configuration is ended (I know that HA will not work with these
values), it's just to
set the configuration on 1 node of the HA cluster the more quickly
possible.
Regards
Alain
> > Thanks for your response Andrew.
> >
> > Further questions :
> > I would like to change /*cluster-delay*/ and /*dc-deadtime*/ default
> > values in sources,
>
> why?
> > I found cluster-delay default value in common.c in pacemaker pengine
> part :
> > pacemaker/lib/pengine/common.c :
> > ? { "cluster-delay", "transition_idle_timeout", "time", NULL, "60s",
> > &check_time,
> >
> > but can't find in pacemaker or heartbeat or ... etc. where I could
> > change the
> > dc-deadtime default value ?
> >
> > Thanks a lot
> > Regards
> > Alain
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
