Hi, On Wed, Apr 21, 2010 at 11:07:08AM +0200, Karel Brenkman wrote: > Hi, > > > > We want to use the ilo boards from our hp DL380 servers in the stonith > config. > > So far everything is running smoothly there is only one BIG issue: > > > > When stonith kicks in it logs in in to the ilo board and does the power > off action ( already tried button, power ilo_protocol 1.2 and 2), but > then acpi kicks in and a normal shutdown procedure will run.
The "power" method shouldn't ask for acpi cooperation. Are you absolutely sure that acpid got involved in that case too? Thanks, Dejan > In our case this means heatbeat want to tell the dc it is going down, > but it can't because of the missing heartbeat communication (duh). So it > will never stop. > > It will stop when I enable the heartbeat channel(s) again. > > > > So whelp > > > > Regards > > Karel > > > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
