HI,

Thanx all and please forget this post.
We had typo's in routing scripts etc

But for thos interesting in our working setup:
Settings to gets this working :
Stonith action reboot (default)

Stonith settings (instance attributes)
Hostlist, ilo_hostname,ilo_user and ilo_password ..... obvious;)
Ilo_power_down_method = button
Ilo_can_reset = 1
Ilo_protocol = 1.2




-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Dejan
Muhamedagic
Sent: Wednesday, April 21, 2010 5:00 PM
To: General Linux-HA mailing list
Subject: Re: [Linux-HA] Stonith external/riloe won't stop server

Hi,

On Wed, Apr 21, 2010 at 12:02:44PM +0200, Karel Brenkman wrote:
> After stopping the heartbeat interfaces and getting the system halted
> message on the console this is what comes up in the log file:
> 
> 21 12:00:58 xh-3 mgmtd: [7714]: info: mgmtd is shutting down
> Apr 21 12:00:58 xh-3 mgmtd: [7714]: info: final_crm: live
> Apr 21 12:00:58 xh-3 mgmtd: [7714]: debug: [mgmtd] stopped
> Apr 21 12:00:59 xh-3 openais[7685]: [crm  ] notice: pcmk_shutdown:
mgmtd
> confirmed stopped
> Apr 21 12:00:59 xh-3 openais[7685]: [MAIN ] notice: stop_child: Sent
-15
> to crmd: [7713]
> Apr 21 12:00:59 xh-3 crmd: [7713]: info: crm_signal_dispatch: Invoking
> handler for signal 15: Terminated
> Apr 21 12:00:59 xh-3 crmd: [7713]: info: crm_shutdown: Requesting
> shutdown
> Apr 21 12:00:59 xh-3 crmd: [7713]: info: do_shutdown_req: Sending
> shutdown reque

Did you check the device settings? Otherwise, contact the iLO
vendor. This plugin is in a pretty wide use, so far this kind of
problem wasn't reported.

Thanks,

Dejan

> Until enabling the heartbeat interfaces the system keeps running
> rrrrggghhh
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Karel
Brenkman
> Sent: Wednesday, April 21, 2010 11:53 AM
> To: General Linux-HA mailing list
> Subject: Re: [Linux-HA] Stonith external/riloe won't stop server
> 
> Well absolutely sure:
> To test the config I stop the 2 heartbeat interfaces (eth4 and eth5 in
> our case).
> Stonith kicks in at the prompt appears: The system is going down for
> system halt now.
> And there it stays forever.
> 
> BUT when I enable one heartbeat interface (ifup eth4) then almost
> immediately things get rolling and the machine is power off
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Dejan
> Muhamedagic
> Sent: Wednesday, April 21, 2010 11:39 AM
> To: General Linux-HA mailing list
> Subject: Re: [Linux-HA] Stonith external/riloe won't stop server
> 
> Hi,
> 
> On Wed, Apr 21, 2010 at 11:07:08AM +0200, Karel Brenkman wrote:
> > Hi,
> > 
> >  
> > 
> > We want to use the ilo boards from our hp DL380 servers in the
stonith
> > config.
> > 
> > So far everything is running smoothly there is only one BIG issue:
> > 
> >  
> > 
> > When stonith kicks in it logs in in to the ilo board and does the
> power
> > off action ( already tried button, power ilo_protocol 1.2 and 2),
but
> > then acpi kicks in  and a normal shutdown procedure will run.
> 
> The "power" method shouldn't ask for acpi cooperation. Are you
> absolutely sure that acpid got involved in that case too?
> 
> Thanks,
> 
> Dejan
> 
> > In our case this means heatbeat want to tell the dc it is going
down,
> > but it can't because of the missing heartbeat communication (duh).
So
> it
> > will never stop. 
> > 
> > It will stop when I enable the heartbeat channel(s) again.
> > 
> >  
> > 
> > So whelp
> > 
> >  
> > 
> > Regards
> > 
> > Karel
> > 
> >  
> > 
> > _______________________________________________
> > Linux-HA mailing list
> > [email protected]
> > http://lists.linux-ha.org/mailman/listinfo/linux-ha
> > See also: http://linux-ha.org/ReportingProblems
> _______________________________________________
> Linux-HA mailing list
> [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>  
> 
> __________ Informatie van ESET NOD32 Antivirus, versie van database
> viruskenmerken 4755 (20100108) __________
> 
> Het bericht is gecontroleerd door  ESET NOD32 Antivirus.
> 
> http://www.eset.com
>  
>  
> 
> __________ Informatie van ESET NOD32 Antivirus, versie van database
> viruskenmerken 4755 (20100108) __________
> 
> Het bericht is gecontroleerd door  ESET NOD32 Antivirus.
> 
> http://www.eset.com
>  
> _______________________________________________
> Linux-HA mailing list
> [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>  
> 
> __________ Informatie van ESET NOD32 Antivirus, versie van database
> viruskenmerken 4755 (20100108) __________
> 
> Het bericht is gecontroleerd door  ESET NOD32 Antivirus.
> 
> http://www.eset.com
>  
>  
> 
> __________ Informatie van ESET NOD32 Antivirus, versie van database
> viruskenmerken 4755 (20100108) __________
> 
> Het bericht is gecontroleerd door  ESET NOD32 Antivirus.
> 
> http://www.eset.com
>  
> _______________________________________________
> Linux-HA mailing list
> [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
 

__________ Informatie van ESET NOD32 Antivirus, versie van database
viruskenmerken 4755 (20100108) __________

Het bericht is gecontroleerd door  ESET NOD32 Antivirus.

http://www.eset.com
 
 

__________ Informatie van ESET NOD32 Antivirus, versie van database
viruskenmerken 4755 (20100108) __________

Het bericht is gecontroleerd door  ESET NOD32 Antivirus.

http://www.eset.com
 
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems

Reply via email to