Hi, On Fri, Jun 24, 2011 at 08:10:58PM +0200, Lars Ellenberg wrote: > On Fri, Jun 24, 2011 at 10:40:36AM +0200, Dejan Muhamedagic wrote: > > Hi, > > > > On Tue, May 17, 2011 at 04:10:14PM +0400, Alexander Polyakov wrote: > > > IPaddr not work correctly on large routing tables on Linux > > > > > > If the contents of the routing table is large (eg, full view, derived > > > from the quagga) then the node can not remove the public IP address. > > > In the top hang two Process: route and grep "remove ip ". Because of > > > this, there is no valid switch node. > > > > Just how big is your routing table? What does "time route -n" > > show? > > Oh, a full routing table can get quite large. > The BGP table currently has > 350k entries ;-) > > Besides, there is no point in doing > route -n | grep $IP first, > and then doing route -n del -host $IP > > The grep is wrong, anyways, as it may match more than just the > intended IP. Testing on non-empty output ([ `x | y` ]) instead > of the exit code (x | y >/dev/null) looks bit strange as well. > And, if it's not there, route del may complain, > but all is good and shiny, still. > > So I'm fine with just dropping that if route -n | grep ; then.
And it has been removed. Cheers, Dejan > Possibly IPaddr2 works better for Alexander? > > -- > : Lars Ellenberg > : LINBIT | Your Way to High Availability > : DRBD/HA support and consulting http://www.linbit.com > > DRBD® and LINBIT® are registered trademarks of LINBIT, Austria. > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
