Stef Daniels VK5HSX wrote:
Greetings,
I am in the process of trying to get a BBS back operational. The
following is the setup:
P4 1.2Ghz Celeron
MSI Motherboard
512MB RAM
40GB ATA Drive
ttyS0 -> 9600bd -MFJ 1270b (1200bd TNC) axport '2'
ttyS1 -> 4800bd - AEA PK232 (4800bd TNC) axport '3'
Debian GNU\linux 3.1 (2.4.27 kernel)
using: libax25-0.0.11, ax25-apps-0.0.6, aax25-tools-0.0.8, node-0.3.2,
fbb7.04j
The problem is after we run our ax25 script to call up modules, tnc into
kiss and kissattach devices (which all work fine), upon connect using
port '2' the tnc "sta" LED comes on and tnc hangs.
We have tried the following:
Different- Computers, Cables, TNC's, O\S's, kernel's, hardrive, P\Supply
and Serial ports (PCI Serial Cards), to NO avail.
Any ideas, help, comments greatfully and most appreciatedly received!!
Hi Stef,
You haven't really told us much, some configs would be nice, especially
your ax25 start-up file, axports, and port.sys for starters.
Does the problem occur using the call function or does it happen from
the bbs? You don't say if you're trying to use the bbs yet, only that
you want to get one running, and you don't say what the bbs is (or will
be). It's not safe to assume fbb.
Did you really try different O\S's, or was it just different Linux
distributions?
Although I'm using kernel 2.6.18-3 on the system here, I do have another
installation on a P166 with kernel 2.4.31 (from memory), and they both
work ok.
Both machines run Debian 3.1 (Sarge)
Ray vk2tv
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
