Stef Daniels VK5HSX a écrit :
Greetings,
I am in the process of trying to get a BBS back operational. The
following is the setup:
P4 1.2Ghz Celeron
MSI Motherboard
512MB RAM
40GB ATA Drive
ttyS0 -> 9600bd -MFJ 1270b (1200bd TNC) axport '2'
ttyS1 -> 4800bd - AEA PK232 (4800bd TNC) axport '3'
Debian GNU\linux 3.1 (2.4.27 kernel)
using: libax25-0.0.11, ax25-apps-0.0.6, aax25-tools-0.0.8, node-0.3.2,
fbb7.04j
The problem is after we run our ax25 script to call up modules, tnc into
kiss and kissattach devices (which all work fine), upon connect using
port '2' the tnc "sta" LED comes on and tnc hangs.
We have tried the following:
Different- Computers, Cables, TNC's, O\S's, kernel's, hardrive, P\Supply
and Serial ports (PCI Serial Cards), to NO avail.
Any ideas, help, comments greatfully and most appreciatedly received!!
Are you sure that your TNCs are set in KISS mode before using mkiss
driver for AX25 ?
You must put them into KISS mode manually while no mkiss driver is
loaded and using a terminal program
such as MINICOM.
I used minicom to adjust my KPC9612 dual port TNC serial baud rate and
calibrate the modulation
level of 1200 and 9600 baud radio ports.
73 de Bernard, f6bvp
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
