At 08:34 PM 20/07/2007, you wrote:
Doug wrote:
Is there anyway to connect a BayPac BP-1 modem to a linux system. I
seem to find drivers
for only the epp and usb variety. I need a modem to check my port
configiration via the
"LISTEN" command and I have run out unless I shut down the cluster
and the bbs.
Fbb is not loaded onto the system just yet. This is a new system
(Mepis 6.5) and nothing
else is loaded on to it yet except the ax25 stuff. The BP-1 is a
serial device.
Do you have the kernel modules baycom_ser_fdx and/or baycom_ser_hdx
? Those should be the kernel modules for baycom serial-port devices
-- fdx is full duplex and should work for all but the stubborn UARTs.
I don't have experience with the BP-1, but I have successfully
loaded the parallel-port PICPAR (Tiger BP-96 modem) with the kernel
module baycom_par
-Lance KJ5O
-----------------
Lance they do not appear to be in the depository for Mepis. I just
don't want to start recompiling kernels and
I think possibly those two drivers might need some kernel work. But I
will look for those and see what I have to
do. I have never used the BP-1 before but I just happened to have one
on the shelf. This is my first attempt at
getting a packet system going on anything but a Red Hat package...
With the depository, it looked so simple!!
Thanks very much,
Doug VE5DA
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
