Hi Affan!
On Wed, Mar 17, 1999 at 12:52:06PM +0700, Affan Basalamah (96-018) wrote:
> after a sick fsck, I cannot initialize my ax1 interface.
> this is what happen after I initialize my ax1 interface using rc.com2
> script :
>
> /etc/rc.com2
> Configuring:
> AX.25: ttyS1 -> to HF: 44.132.16.1 tty_speed: tcgetattr: I/O error
> SIOCSIFNETMASK: No such device
> SIOCSIFBRDADDR: No such device
> ax1: unknown interface.
> ./rc.com2: /proc/sys/net/ax25/ax1/ip_default_mode: No such file or
> directory
> ./rc.com2: /proc/sys/net/ax25/ax1/maximum_packet_length: No such file or
> directory
> axconfig: port HF not active
> [...]
> can anyone tell me how to activate my interface back ??
> I've tried to re-makeinstall my ax25-utils and compiling my kernel back,
> but there is no change.
Have you compiled all the needed stuff as modules? If you did, it looks like
they are not being loaded when they should have.
Recheck your kernel configuration (maybe you're forgetting kmod) and the modules
directory, and do a 'depmod -a' to see if the modules are allright.
If you didn't compile the stuff as modules, recheck that they are included in
your newly compiled kernel and try again.
If that doesn't help, it beats me! ;-)
Bye & Good Luck!
Pablo B.
