Richard Adams wrote:
>
> According to Affan Basalamah: While burning my CPU.
> >
> > hi there,
> >
> > after a sick fsck, I cannot initialize my ax1 interface.
> > this is what happen after I initialize my ax1 interface using rc.com2
> > script :
> >
> > /etc/rc.com2
> > Configuring:
> > AX.25: ttyS1 -> to HF: 44.132.16.1 tty_speed: tcgetattr: I/O error
>
Your problem is that you not have the ttyS1 [COM2] enable
you need first to define this
like this in your rc.com2:
------
setserial /dev/ttyS1 uart 16550A port 0x2f8 irq 3
------
and if is just one port you have the first interface isn't the ax1
this is the ax0
i hope this help you
73's Jose (HI8GN)
> The way the echo command is working i would take a guess and say it the "-n"
> which is causing the problem, remove the -n after echo in your script and
> try again, thats what i would check "first".
>
> You could also try using kissattach from the command line, just to check
> what happens.
>
> > SIOCSIFNETMASK: No such device
> > SIOCSIFBRDADDR: No such device
> > ax1: unknown interface.
> > ./rc.com2: /proc/sys/net/ax25/ax1/ip_default_mode: No such file or
> > directory
> > ./rc.com2: /proc/sys/net/ax25/ax1/maximum_packet_length: No such file or
> > directory
> > axconfig: port HF not active
> >
> > and this is my rc.com2 script :
> >
> > echo "/etc/rc.com2"
> > echo " Configuring:"
> >
> > echo -n " AX.25: ttyS1 -> to HF: 44.132.16.1 "
> ^^ remove.
>
> > /usr/sbin/kissattach -i 44.132.16.1 /dev/ttyS1 HF
>
> This command is failing, so all other errors are caused because kissattach
> is not attaching the interface.
>
> > sleep 1
> > /sbin/ifconfig ax1 netmask 255.255.255.0
> > /sbin/ifconfig ax1 broadcast 44.132.16.255
> > echo 1 > /proc/sys/net/ax25/ax1/ip_default_mode
> > echo 100 > /proc/sys/net/ax25/ax1/maximum_packet_length
> > #/usr/sbin/axparms -parms HF -ipmode V -paclen 100
> > #/usr/sbin/axctl HF -paclen 100
> > #/usr/sbin/axparms HF -ipmode V
> >
> > can anyone tell me how to activate my interface back ??
> > I've tried to re-makeinstall my ax25-utils and compiling my kernel back,
> > but there is no change.
> >
> > thank you very much,
> > --affan--
> >
>
> --
> Regards Richard.
> [EMAIL PROTECTED]
